The most trusted tools in the world
Home  |  Products  |  Insulation Testers  |  

Fluke 1587/1577 Insulation Multimeters

 Fluke 1587/1577

Two powerful tools in one

The Fluke 1587 and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.

Whether you work on motors, generators, cables, or switch gear, the Fluke 1587/1577 Insulation Multimeters are ideally suited to help you with your tasks and at a cost that is far less than buying the two products.

Specifications
Voltage DC
Maximum Voltage:  1000 V
Accuracy:  1577: ±(0.2%+2)
 1587: ±(0.09%+2)
Maximum Resolution:  0.001V
Voltage AC
Maximum Voltage:  1000 V
Accuracy:  1577: ±(2%+3)
 1587: ±(2%+3)
AC Bandwidth:  1587: 5kHz*
 *with low pass filter; 3db @ 800 Hz
Maximum Resolution:  0.1 mV
Current DC
Maximum Amps:  400mA
Amps Accuracy:  1577: ±(1.0%+2)
 1587: ±(0.2%+2)
Maximum Resolution:  0.01 mA
Current AC
Maximum Amps:  400mA
Amps Accuracy:  1577: ±(2.0%+2)*
 1587: ±(1.5%+2)*
 * 1kHz bandwidth
Maximum Resolution:  0.01 mA
Resistance
Maximum Resistance:  50 MΩ
Accuracy:  1577: ±(1.2%+2)
 1587: ±(0.9%+2)
Maximum Resolution:  0.1Ω
Capacitance(1587 only)
Maximum Capacitance:  9,999 µF
Accuracy:  ±(1.2%+2)
Maximum Resolution:  1 nF
Frequency (1587 only)
Maximum Frequency:  100 kHz
Accuracy:  ±(0.1%+1)
Maximum Resolution:  0.01 Hz
Temperature Measurement (1587 only)
 -40.0 °C to 537 °C
 -40.0 °F to 998 °F
 excluding probe
Diode Test (1587 only)
Range:  6 V
Resolution:  1 mV
Accuracy:  ±(2 % + 1)

Insulation Test
Minimum Test Current @ 1kΩ/V:
 1mA
Test Voltages:
1577:  500, 1000 V
1587:  50, 100, 250, 500, 1000 V
Maximum Resistance per Test Voltage:
50V:  
100V:  
250V:  
500V:  
1000V:  1577: 600 MΩ
 1587: 2 GΩ
Maximum Resolution per Test Voltage:
50V:  0.01 MΩ
100V:  0.01 MΩ
250V:  0.1 MΩ
500V:  0.1 MΩ
1000V:  0.1 MΩ
Accuracy per Test Voltage:
50V:  ±(3 % + 5)
100V:  ±(3 % + 5)
250V:  ±(1.5 % + 5)
500V:  1577: ±(2.0 % + 5)
 1587: ±(1.5 % + 5)
1000V:  1577: ±(2.0 % + 5)
 1587: ±(1.5 % + 5) to 600 MΩ, ±(10 % + 3) above 600 MΩ

Environmental Specifications
Operating temperature
 –20 °C to +55 °C
Storage temperature
 -40°C to +60°C
Humidity (Without Condensation)
 0% - 95% (10 °C – 30 °C)
 0% - 75% (30 °C – 40 °C)
 0% - 40% (40 °C – 55 °C)
Operating Altitude
 2000 m

Safety Specifications
Overvoltage category
 Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement CAT III 1000 V and CAT IV 600 V
Agency Approvals
 2000 m CAT III 1000 V, CAT IV 600 V; 3000 m CAT II 1000 V, CAT III 600 V

Mechanical & General Specifications
Size
 203 x 100 x 50 mm (with holster)
Weight
 624 g
Warranty
 3 years
Battery life Alkaline
Meter use:  1000 hours
Insulation test use:  Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
IP Rating
 IP40
Model NameDescriptionPrice List
Fluke 1587 Insulation Multimeter

Includes:

  • Remote probe
  • Test leads
  • Alligator clips
  • K-type thermocouple
  • Hard case
  • Four AA alkaline batteries
  • Quick Reference Guide
  • CD Rom with Manual
On Request
Fluke 1577 Insulation Multimeter

Includes:

  • Remote probe
  • Test leads
  • Alligator clips
  • Hard case
  • Four AA alkaline batteries
  • Quick Reference Guide
  • CD Rom with Manual
On Request

ClipsPrice List
AC285AC285 SureGrip™ Alligator Clip SetOn Request

Test ProbesPrice List
TP220TP220 SureGrip™ Industrial Test ProbesOn Request

Cases and HolstersPrice List
C101C101 Hard CaseOn Request
C25C25 Soft Meter CaseOn Request
C550C550 Tool BagOn Request
CXT170CXT170 Extreme CaseOn Request
Fluke MeterCleaner WipesFluke MeterCleaner WipesOn Request
TPAKTPAK ToolPak, Meter Hanging KitOn Request

Current clampsPrice List
i1010 Kiti1010-KIT AC/DC Current Clamp and Carry Case KitOn Request
i200i200 AC Current ClampOn Request
i400i400 AC Current ClampOn Request

LightsPrice List
L200L200 Probe LightOn Request
L210L210 Probe Light + Probe ExtenderOn Request
LVD1LVD1 Volt LightOn Request

TemperaturePrice List
80AK-A80AK-A Thermocouple AdapterOn Request
80PK-2780PK-27 Industrial Surface ProbeOn Request
80PK-3A80PK-3A Surface Probe (Type K)On Request
80PK-880PK-8 Pipe Clamp Temperature Probe (Type K)On Request

Test LeadsPrice List
TL27TL27 Heavy Duty Test Lead SetOn Request
TL225TL225 SureGrip™ Stray Voltage Adapter Test Lead KitOn Request
Related Products
 
 Fluke 434 Series II Energy Analyzer »
 
 Fluke 810 Vibration Tester »
 
 Ti125 Industrial-Commercial Thermal Imager »
Home   |   Site Map   |   Fluke Corporation   |   Safety Notices  |   Terms and Conditions   |   Privacy Statement   |   Disclaimer © 1995 - 2013 Fluke Corporation