The most trusted tools in the world
Home  |  Products  |  Digital Multimeters  |  
This product is discontinued or reclassifiedFluke suggests:
Fluke 28 II Ex Intrinsically Safe True-rms Digital Multimeter

Industrial Multimeters: Fluke 87V Ex Intrinsically Safe True RMS Multimeter

 Fluke 87V Ex

Intrinsically safe version of the world’s most popular Multimeter

With its high performance, accuracy and motor drive compatibility, the Fluke 87V is the most popular industrial multimeter in the world. Now Fluke has introduced a new intrinsically safe version – the 87V Ex – for measurements in and around hazardous areas.

The new Fluke 87V Ex has all the measurement and troubleshooting functions of the proven Fluke 87V. Unlike most other ATEX-certified tools, it can be used both inside and outside the hazardous zone (ATEX Zones 1 & 2) without compromising performance or compliance. So there’s no need to carry different tools for use inside or outside the hazardous zones. It also has a built-in thermometer with TC probe, further reducing technicians’ tool counts.

87V Ex The 87V Ex Features:

  • ATEX safety rating for use in Ex-zone 1 and zone 2
  • CAT IV 600 V electrical safety rating
  • Unique function for accurate voltage and frequency measurements on variable speed motor drives (VSD’s)
  • Large display with bright, two-level backlight makes the 87V Ex easy to read in all lighting environments
  • Built-in thermometer (probe included)
  • True-rms ac voltage and current for accurate measurements on non-linear signals
  • 4-1/2 digit mode for precise measurements (20,000 counts)
  • Measure up to 1000 V and 10 A (ac/dc)
  • Frequency to 200 kHz and % duty cycle
  • Resistance, continuity and diode test
  • 10,000 μF capacitance range for components and motor caps
  • Min/Max-Average and Peak capture to record transients and variations automatically
  • Relative mode to remove test lead interference on resistance measurements
  • Auto and manual ranging for maximum flexibility
  • Analog bargraph for fast changing or unstable signals
  • Input Alert provides

Safety ratings

  • ATEX safety rating: II 2 G EEx ia IIC T4
  • Electrical safety rating: EN61010-1 CAT IV 600 V and CAT III, 1000 V

 

General Specifications
Voltage DC
Maximum voltage:  1000 V
Accuracy:  ± (0.05 % + 1)
Maximum resolution:  10 μV
Voltage AC
Maximum voltage:  1000 V
Accuracy:  ± (0.7 % + 2) True-rms
AC bandwidth:  20 kHz
Maximum resolution:  10 μV
Current DC
Maximum amps:  10 A (20 A for 30 seconds maximum)
Amps accuracy:  ± (0.2 % + 2)
Maximum resolution:  0.01 μA
Current AC
Maximum amps:  10 A (20 A for 30 seconds maximum)
Amps accuracy:  ± (1.0 % + 2)
Maximum resolution:  True-rms 0.01 μA
Resistance
Maximum resistance:  50 MΩ
Accuracy:  ± (0.2 % + 1)
Maximum resolution:  0.1 Ω
Capacitance
Maximum capacitance:  9,999 μF
Accuracy:  ± (1 % + 2)
Maximum resolution:  0.001 nF
Frequency
Maximum frequency:  200 kHz
Accuracy:  ± (0.005 % + 1)
Maximum resolution:  0.001 Hz
Duty Cycle
Maximum duty cycle:  99.90 %
Accuracy:  ± (0.2 % per khz +0.1 %)
Maximum resolution:  0.10 %
Temperature
Range:  -200.0 °C to 1090 °C (-328 °F to 1994 °F) excluding probe
80BK Temperature Probe
Range:  -40.0 °C to 260 °C (-40 °F to 500 °F)
Accuracy:  2.2 °C or 2 % whichever is greater
Conductance
Maximum conductance:  60.00 nS
Accuracy:  ± (1.0 % + 10)
Maximum resolution:  0.001 nS
Diode
Range:  3 V
Resolution:  1 mV
Accuracy:  ± (2 % + 1)
Duty Cycle Range
Accuracy:  Within ± (0.2 % per kHz + 0.1 %)
Measurements restriction in Ex-hazardous area
Voltage:  65 V
Current:  5 A

 

Environmental Specifications
Operating Temperature
 -20 °C to +50 °C
Storage Temperature
 -40 °C to +60 °C
Humidity (Without Condensation)
 0 % to 80 % (0 °C to 35 °C) 0 % to 70 % (35 °C to 50 °C)
Operating Altitude
 2000 m

 

Safety Specifications
Overvoltage category
 EN 61010-1 to 1000 V CAT III, 600 V CAT IV
Agency Approvals
 CSA, TÜV
ATEX certification
 Ex II 2 G EEx ia IIC T4
Agency Approvals
 ZELM 05 ATEX 0274

 

Mechanical & General Specifications
Size
 201 x 98 x 52 mm (with holster)
Weight
 12,5 oz. (355 kg) with holster
Display (Digital)
 6000 counts updates 4/sec. 19,999 counts in high-resolution mod
Display (Analog)
 32 segments, updates 40/sec.
Warranty
 1 year
Battery Life
 ~400 hours typical without backlight
Shock
 1 Meter drop per IEC 61010-1:2001
Vibration
 Per MIL-PRF-28800 for a Class 2 instrument
Model NameDescriptionPrice List
Fluke 87V ExIntrinsically Safe True-RMS Multimeter
Includes:
  • TL75 test leads
  • AC175 Alligator Clips
  • Red Holster
  • 9V battery (installed)
On Request
Related Products
 
 Fluke 80 Series V Digital Multimeters: The Industrial Standard »
Home   |   Site Map   |   Fluke Corporation   |   Safety Notices  |   Privacy Statement   |   Terms of Use  |   Terms and Conditions of Sale © 1995 - 2014 Fluke Corporation