English

Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex®

Model#: Fluke 381 Part#: 5065875 UPC#: 0 95969 53748 3
Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex® is rated 3.9 out of 5 by 27.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 23.48ms
  • REVIEWS, PRODUCT
  • Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex®
  • Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex®
  • Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex®
  • Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex®

Key features

  • Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement with measurement accuracy
  • Removable magnetic display can be mounted where it is easily seen
  • iFlex® Flexible Current Probe expands the measurement range to 2500 A AC
  • CAT IV 600 V, CAT III 1000 V

 

In stock
$874.99
FREE Shipping
30-day Returns

Product overview: Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex®

What once took two people, now takes one

Now one technician can do jobs that would otherwise require two people. Clamp the Fluke 381 around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings.

The iFlex® Flexible Current Probe (included) expands the measurement range to 2500 A AC while providing increased display flexibility. With a cord that runs 6 feet, you can finally measure those tight spaces, awkward sized conductors and disorganized wires.

Other key features

  • Integrated low pass filter and state-of-the-art signal processing allows for use in noisy electrical environments while providing stable readings
  • Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
  • Ergonomic design fits in your hand and can be used while wearing protective equipment
  • Radio transmitter automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
  • Three-year warranty
Safety Conformance: IEC/EN 61010-1:2001, 1000V CAT III, 600V CAT IV

What's in the box:

  • 381 Remote Display Clamp Meter
  • (1 pair) TL75 test leads
  • (1 pair) AC175 alligator clips
  • 18-inch iFlex®flexible current probe
  • Soft carrying case

Specifications: Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex®

Electrical Specifications
AC Current via Jaw
Range999.9 A
Resolution0.1 A
Accuracy2% ± 5 digits (10-100 Hz)
5% ± 5 digits (100-500 Hz)
Crest Factor (50/60 Hz)3 @ 500 A
2.5 @ 600 A
1.42 @ 1000 A
Add 2% for C.F. > 2
AC Current via Flexible Current Probe
Range999.9 A / 2500 A (45 Hz – 500 Hz)
Resolution0.1 A / 1 A
Accuracy3% ± 5 digits
Crest Factor (50/60 Hz)3.0 at 1100 A
2.5 at 1400 A
1.42 at 2500 A
Add 2% for C.F. > 2
Position Sensitivity
Flexible current probeDistance from Optimum
 i2500-10 Flexi2500-18 FlexError
A0.5 in (12.7 mm)1.4 in (35.6 mm)±0.5%
B0.8 in (20.3 mm)2.0 in (50.8 mm)±1.0%
C1.4 in (35.6 mm)2.5 in (63.5 mm)±2.0%
Measurement uncertainty assumes centralized primary conductor at optimum position, no external electrical or magnetic field, and within operating temperature range.
DC Current
Range999.9 A
Resolution0.1 A
Accuracy2% ± 5 digits
AC Voltage
Range600 V /1000 V
Resolution0.1 V / 1 V
Accuracy1.5% ± 5 digits (20 – 500 Hz)
DC Voltage
Range600.0 V /1000 V
Resolution0.1 V / 1 V
Accuracy1% ± 5 digits
Frequency – Via Jaw
Range5.0 – 500.0 Hz
Resolution0.1 Hz
Accuracy0.5% ± 5 digits
Trigger Level5 – 10 Hz, ≥ 10 A
10 – 100 Hz, ≥ 5 A
100 – 500 Hz, ≥ 10 A
Frequency via Flexible Current Probe
Range5.0 to 500.0 Hz
Resolution0.1 Hz
Accuracy0.5% ± 5 digits
Trigger Level5 to 20 Hz, ≥ 25 A
20 to 100 Hz, ≥ 20 A
100 to 500 Hz, ≥ 25 A
Resistance
Range600 Ω/6 kΩ/60 kΩ
Resolution0.1 Ω/1 Ω/10 Ω
Accuracy1% ± 5 digits
Mechanical Specifications
Size (L x W x H)277 x 88 x 43 mm (55 mm for remote unit)
Weight350 g
Jaw Opening34 mm
Flexible Current Probe Diameter7.5 mm
Flexible Current Probe Cable Length
(head to electronics connector)
1.8 m
Environmental Specifications
Operating Temperature-10°C to +50°C
Storage Temperature-40°C to +60°C
Operating HumidityNon condensing (< 10°C)
≤ 90% RH (at 10°C to 30°C)
≤ 75% RH (at 30°C to 40°C)
≤ 45% RH (at 40°C to 50°C)
(Without Condensation)
Operating Altitude2,000 meters
Storage Altitude12,000 meters
EMI, RFI, EMC, RFEN 61326-1:2006, EN 61326-2-2:2006
ETSI EN 300 328 V1.7.1:2006
ETSI EN 300 489 V1.8.1:2008
FCC Part 15 Subpart C Sections 15.207, 15.209, 15.249
FCCID: T68-F381
RSS-210 IC: 6627A-F381
Temperature CoefficientsAdd 0.1 x specified accuracy for each degree C above 28°C or below 18°C
Wireless Frequency2.4 GHz ISM Band 10 meter range
Safety ComplianceANSI/ISA S82.02.01:2004
CAN/CSA-C22.2 No. 61010-1-04
IEC/EN 61010-1:2001 to 1000V CAT III, 600V CAT IV.
Double Insulation ClearancePer IEC 61010-2-032
Double Insulation CreepagePer IEC 61010-1
Agency Approvals 

Models: Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex®

Fluke 381
Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex®
Part#: 5065875
UPC#: 0 95969 53748 3

Includes:

  • 18-inch iFlex®flexible current probe
  • Coated instruction card
  • Safety information sheet
  • Soft carrying case
  • TL75 test leads
  • Five AA Alkaline batteries
Fluke 381/AU
Part#: 3610452
UPC#: 0 95969 53748 3
Fluke 381 CAL
Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex®, with a traceable certificate of calibration with data from Fluke
Part#: 5160675
UPC#: 0 95969 94693 3

Includes:
  • 18-inch iFlex®flexible current probe
  • Coated instruction card
  • Safety information sheet
  • Soft carrying case
  • TL75 test leads
  • Five AA Alkaline batteries
  • A traceable certificate of calibration with data from Fluke

Does this model come with a NIST traceable calibration certificate?

Asked by: Silentdriver
The Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex&reg; does not come with the certificate as standard, but can be requested at purchase for an additional cost.
Answered by: FlukeCorp
Date published: 2023-07-24

Where is fluke 381 made in? What is the guarantee on this 381 clamp meter?

Asked by: Essak
  • y_2024, m_3, d_12, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_3739292926004, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 141.83ms
  • QUESTIONS, PRODUCT
Rated 1 out of 5 by from Rubbish but used to be a good company bought an expensive 381 clamp meter and the battery catch has broken mainly because its flimsy. but no chance of spare part and it cost over £800 will never buy fluke again
Date published: 2023-10-03
Rated 1 out of 5 by from Don't ever buy it red light Don't ever buy it or waist your money on it Expensive repair I use it few times i changed a batterys ones on it Red light pop up with a blank screen
Date published: 2023-05-14
Rated 5 out of 5 by from Useful tool Very useful for troubleshooting 3 phase motors. Quick response.
Date published: 2021-08-09
Rated 2 out of 5 by from Nice features just not build to last a year All the meters I have bought don't last long maybe a year
Date published: 2018-11-12
Rated 1 out of 5 by from flex clamp does not do DC amps sucks need to make a product that does DC amps also with the flex amp contraption
Date published: 2018-04-19
Rated 5 out of 5 by from test it was a useful product and that is why i am writing about it
Date published: 2017-03-30
Rated 5 out of 5 by from My most treasured possession I love my Fluke 381 more than my own children (kidding, I don't have kids). I use it daily in my work on boats, both for AC and DC. I never doubt the readings, and the remote display makes me the coolest tech on the dock. It gets borrowed often because it's so awesome. I can clamp the starter or alternator in the engine room, and take the remote display to the helm (except on the REALLY big boats). What usually takes two technicians, I can accomplish myself with my Fluke 381. My Fluke should get it's own paycheck. My only complaint is I really wish the iFlex did DC amperage. And I wish it were a little smaller. Unlike some other reviewers, I must be lucky because I don't think the battery consumption is bad. I replace them maybe every 2 months, and I use it on a daily basis.
Date published: 2016-12-13
Rated 5 out of 5 by from Another awesome Fluke Product I really enjoy using this clamp meter. I am in the industrial field and use the iflex to calibrate compressors. Without the iFlex, it would be impossible to get a meter around the motor leads inside the motor peckerhead.
Date published: 2016-12-12
  • y_2024, m_3, d_12, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_US, sid_3739292926004, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 23.53ms
  • REVIEWS, PRODUCT
Please enable cookies to view product reviews.
Welcome to Fluke's Chat GPT Assistant. As with other generative AI systems, this chatbot may occasionally generate incorrect information. For questions regarding the safe use of Fluke tools, please refer to your owners manual. You must comply with your employer’s safety standards and obtain necessary training before using Fluke tools or taking electrical measurements. To speak with a person, visit our Contact Us page.
How can I help you today?