Keeping your world up and running.
Home  |  Products  |  Digital Multimeters  |  

Fluke 233 Remote Display Multimeter

The Fluke 233 remote display digital multimeter allows you to be 30 ft away from the measurement point with the innovative wireless display. With the 233, you can perform two man jobs alone and remove the hazard from the job.
 Fluke 233
Imagine the possibilities
What if you could be in two places at once?


The new Digital Multimeter with True RMS Fluke 233 Remote Display allows maximum flexibility in demanding measurement environments. Place the removable display where you can see it and then place the multimeter at your convenience: no more juggling the leads and the meter while stretching into tight spaces. You can now take measurements in hard to reach places, where machines or electric panels are physically separated from the limit switch or isolation, or in areas where access is restricted to users as clean rooms or hazardous areas.

  • True-rms ac voltage and current for accurate measurements on non-linear signals
  • Measure up to 1000 V ac and dc
  • Measure up to 10 A (20 A for 30 seconds)
  • 10,000 μF capacitance range
  • Frequency to 50 kHz
  • Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
  • Resistance, continuity and diode test
  • Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement for added flexibility. No interference with measurements
  • The removable magnetic display can be conveniently mounted where it is easily seen
  • Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
  • Use as a conventional multimeter when the display is connected
  • Radio transmitter automatically turns off when the display is connected to the meter
  • Auto power off maximizes battery life
  • Min/Max and Average recording to capture variations automatically
  • Test continuity and diodes
  • Easy to read display with large digits and bright backlight
  • Battery life approximately 400 hours
Accuracy specifications
DC voltage
Range  0.1 mV to 1000 V
Accuracy  0.25 % + 2
AC voltage
Range  0.1 mV to 1000 V
Accuracy  1.0 % + 3
DC current
Range  1 mA to 10 A
Accuracy  1.0 % + 3
AC current
Range  1 mA to 10 A
Accuracy  1.5 % + 3
Resistance
Range  0.1 Ω to 40 MΩ
Counts
 6000
Capacitance
Range:  1 nF to 9999 μF
Resolution:  1nF
Frequency
Range:  5 Hz to 50 kHz
Resolution:  0.01Hz
Temperature
 -40 °C to +400 °C
Power
 AA batteries: Three for main body; two for display
Battery life
 400 hours
Wireless frequency
 2.4 GHz ISM Band 10 meter range
Safety rating
 CAT IV 600 V , CAT III 1000 V

General specifications
Basic features
AC true-rms  Yes
Ranging  Auto/Manual
Display
Backlight  Yes
Data storage
Min/Max/Avg  Yes
Other features
Battery type  AA alkaline
Removable display  Yes
Warranty and protection
Safety rating  CAT IV 600 V/CAT III 1000 V
External protection  Rubber overmold
Warranty  Three-years
Size (H x W x L)  5.3 cm x 9.3 cm x 19.3 cm (2.08 in x 3.6 in x 7.6 in)
Weight  604 g (1.3 Ib)
Model NameDescription
Fluke 233Remote Display Multimeter

Cases and Holsters
C116C116 Soft Carrying Case
C280C280 Soft Case
C35C35 Soft Carrying Case
TPAK

Fluke TPAK ToolPak™ Magnetic Meter Hanger Kit includes:

  • 9 inch hook and loop strap
  • Universal hanger clip
  • Hook hanger for non magnetic surfaces
  • Strong magnet

Current Clamps
i1010i1010 AC/DC Current Clamp
i410AC/DC Current Clamp
i2000 flexi2000 flex AC Current Clamp
i200si200s AC Current Clamp
i3000si3000s AC Current Clamp

Pressure
PV350PV350 Pressure Vacuum Module

Temperature
80AK-A80AK Thermocouple Adapter
80PJ-180PJ-1 Bead Probe
80PK-180PK-1 Bead Probe
80PK-980PK-9 General Purpose Probe
80PK-EXT80PK-EXT Extension Wire Kit
80T-150UA80T-150U Universal Temperature Probe
80TK80TK Thermocouple Module
80PK-2780PK-27 SureGrip™ Industrial Surface Temperature Probe
80PK-3A80PK-3A Surface Probe
80PK-880PK-8 Pipe Clamp Temperature Probe

Test Leads
TL220

SureGrip™ Industrial Test Lead Set includes:

  • AC220 SureGrip™ Alligator Clip Set
  • TP220 SureGrip™ Industrial Test Probe Set
  • TL224 SureGrip™ Silicone Test Lead Set (straight to right)
  • One year warranty
TL223TL223 Electrical Test Lead Set
TL71TL71 Premium Test Lead Set
TL225TL225 SureGrip™ Stray Voltage Adapter Test Lead Kit
        
Related Products
 
 Fluke TL175 TwistGuard™ Test Leads »
 
 Fluke TL224 SureGrip™ Insulated Test Leads »
 
 Fluke TPAK ToolPak™ Magnetic Meter Hanger »

Find it. Fix it. Fast.
See how Fluke wireless testers can make your job easier.


Current Measurement Video (.swf) »
Chiller Monitoring Video (.swf) »
Safety Lockout Video (.swf) »
Lighting Video (.swf) »
HVAC Video (.swf) »
Industrial Control Video (.swf) »
Automotive Video (.swf) »
Machinery Video (.swf) »
Electronics Video (.swf) »
Home  |   Site Map  |   Fluke Corporation  |   Safety Notices
Privacy Statement  |   Terms of Use   |   Terms and Conditions of Sale
© 1995 - 2017 Fluke Corporation