Keeping your world up and running.
Home  |  Products  |  Process Calibration Tools  |  Multifunction Calibrators  |  

Fluke 726 Precision Multifunction Process Calibrator

Contact Me
Request A Demo
 Fluke 726

Get More Calibration Power

The Fluke 726 Precision Multifunction Process Calibrator is designed specifically for the Process industry with broad workload coverage, calibration power and unsurpassed accuracy in mind. The 726 measures and sources almost all process parameters and can calibrate almost anything. The 726 will also interpret results without the help of a calculator and store measurement data for later analysis.

Fluke 726

  • More precise measurement and calibration source performance, accuracies of 0.01%.
  • Two separate channels; measure, source and view process signals simultaneously
  • Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
  • Measure or source pressure* using any of 29 Fluke 700Pxx Pressure Modules
  • Source mA with simultaneous pressure measurement to conduct valve and I/P tests
  • Integrated pressure switch test allows you to capture the set, reset and deadband of a switch
  • Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis
  • Transmitter error% calculation, interpret calibration results without a calculator
  • Perform fast linearity tests with auto step and auto ramp features
  • Power transmitters during test using 24 V loop supply and simultaneous mA measurement
  • Store frequently-used test setups for later use
  • Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing
  • HART mode inserts 250 ohm resistor in mA measure and source for compatibility with HART instrumentation
  • Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement.
  • New voltage input protection design for improved reliability
  • Three-year warranty

*Pressure pump required

Measurement Accuracy
Voltage DC
30.000 V  0.01%+ 2 mV (upper display)
20.000 V  0.01%+ 2 mV (lower display)
90.00 mV  0.01%+ 10μV
-10.00 mV to 75.00 mV  0.025 % + 1 count (via TC connector)
Current DC
24.000 mA  0.01%+ 2 mA
Resistance
0.0 to 4000.0 Ω  +/- 0.015%
Frequency
2.0 to 1000.0 CPM  0.05 % + 0.1 cpm
1.0 to 1000.0 Hz  0.05 % + 0.1 Hz
1.00 to 15.00 kHz  0.05 % + 0.01 kHz
Sensitivity  1 V peak-to-peak-minimum
Pressure
Accuracy  from 0.025% of range using any of 29 pressure modules.
 (for detailed specifications refer to pressure modules in options and accessories)
 Modules available for differential, gauge, vacuum, absolute, dual and high pressure.

Source Accuracy
Voltage DC
100.00 mV  0.01%+10 μV
20.000 V  0.01%+2 mV
-10.00 mV to 75.00 mV  0.025 % + 1 count (via TC connector)
Current DC
24.000 mA (Source)  0.01%+ 2 μA
24.000 mA (Simulate)  0.01%+ 2 μA
Resistance
Range, Accuracy (Percent of reading + floor) and Excitation Current  5 to 400 Ω, 0.015% + 0.1 Ω, 0.1 to 0.5mA
 5 to 400 Ω, 0.015% + 0.05 Ω, 0.5 to 3mA
 400 to 1500 Ω, 0.015% + 0.5 Ω, 0.05 to 0.8 mA
 1500 to 4000 Ω, 0.015% + 0.5 Ω, 0.05 to 0.4 mA
Frequency
2.0 to 1000.0 CPM  0.05%
1.0 to 1000.0 Hz  0.05%
1.0 to 10.0 kHz  0.25%
10.0 to 15.0 kHz  0.5%
Waveform:  5 V p-p squarewave, -0.1 V offset

RTDs and Thermocouples
Measure and Source Accuracy:
Cu10  1.8 °C
NI-120  0.15 °C
PT-100 (385)  0.45 °C
PT-100 (392)  0.35 °C
PT-100 (391-JIS)  0.35 °C
PT-200 (385)  0.95 °C
PT-500 (385)  0.55 °C
PT-1000 (385)  0.35 °C
RTD Resolution:  0.01 C (0.01 F)
Cu10.01 C  0.1 C (0.1 F)
J:  0.4 °C
K:  0.5 °C
T:  0.4 °C
E:  0.4 °C
R:  1.4 °C
S:  1.4 °C
B:  1.4 °C
L:  0.45 °C
U:  0.45 °C
N:  0.6 °C
XK:  0.4 °C
BP:  1.1 °C
TC Resolution  J, K, T, E, L, N, U: 0.1 °C, 0.1 °F B, R, S: 1 °C, 1 °F

Specifications
Ramp Functions
Source functions:  Voltage, current, resistance, frequency, temperature
Ramps  Slow ramp, Fast ramp, 25% step-ramp
Loop Power Function
Voltage:  24 V
Accuracy:  10%
Maximum current:  22 mA, short circuit protected
Step Functions
Source functions:  Voltage, current, resistance, frequency, temperature
Steps  25% of range, 100% of range

Environmental Specifications
Operating Temperature
 -10 °C to +55 °C
Storage Temperature
 -20 °C to +71 °C
Operating Altitude
 3000 m

Safety Specifications
Agency Approvals
 EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992

Mechanical & General Specifications
Size
 200mm x 96mm x 47mm (7.9 in x 3.8 in x 1.9 in)
Weight
 650 g (23 oz.)
Batteries
 4 AA alkaline batteries
Battery Replacement
 Separate battery compartment, accessible without breaking calibration seall
Side port connections
 Pressure module connector, also used for remote real-time programming
Model NameDescription
Fluke 726 Precision Multifunction Process Calibrator including:
  • One set of AC72 alligator clips
  • One set of stackable test leads
  • One set of TL 75 testleads
  • User manuals
  • NIST- traceable calibration report and data

Clips
AC220AC220 SureGrip™ Alligator Clips
AC280AC280 SureGrip™ Hook Clips
AC283AC283 SureGrip™ Pincer Clips

Differential Pressure Modules
700P00700P00 Differential Pressure Module
700P01700P01 Differential Pressure Module
700P02700P02 Differential Pressure Module
700P03700P03 Differential Pressure Module
700P04700P04 Differential Pressure Module

Pressure Calibrators
Fluke 750PSeries Pressure Modules
Fluke 750PSeries Pressure Modules
Fluke 750PSeries Pressure Modules

Pumps and Accessories
700PMP700 PMP Pressure Pump
Fluke 700HTHFluke 700HTH Hydraulic Test Hose
700HTH-1Fluke 700HTH-1 Hydraulic Test Hose
700PRV-1Fluke 700PRV-1 Pressure Relief Valve Kit
700PRV-1Fluke 700PRV-1 Pressure Relief Valve Kit
700PTP-1Fluke 700PTP-1 Pneumatic Test Pump
700HTP-2Fluke 700HTP-2 Hydraulic Test Pump

Differential Pressure Module Wet
700P22700P22 Differential Pressure Module Wet
700P23700P23 Differential Pressure Module Wet
700P24700P24 Differential Pressure Module Wet

Absolute Pressure Modules
700PA3700PA3 Absolute Pressure Module
700PA4700PA4 Absolute Pressure Module
700PA5700PA5 Absolute Pressure Module
700PA6700PA6 Absolute Pressure Module
700PRV700PRV Pressure Relief Valve Kit
700PRV700PRV Pressure Relief Valve Kit
700PRV700PRV Pressure Relief Valve Kit
700PRV700PRV Pressure Relief Valve Kit
700PRV700PRV Pressure Relief Valve Kit

Cases and Holsters
C100C100 Universal Carrying Case
C120C120 Hard Carrying Case
C125C125 Meter Case
C510C510 Leather Meter Case
C550C550 Tool Bag
C75C75 Accessory Case
C781C781 Meter Case
CXT80CXT80 Extreme Case
C25C25 Large Soft Case for DMMs
CAMO-C25


CAMO-C25/BD


CAMO-C25/WL


CAMO-C25/WD


CAMO-C25/FO


Camouflage Carrying Case for Fluke Meters
(DESERT DIGITAL)

Camouflage Carrying Case for Fluke Meters
(BLUE DIGITAL CAMO)

Camouflage Carrying Case for Fluke Meters
(WOODLAND CAMO)

Camouflage Carrying Case for Fluke Meters
(WOODLAND DIGITAL)

Camouflage Carrying Case for Fluke Meters
(FOREST CAMO)

TPAK

Fluke TPAK ToolPak™ Magnetic Meter Hanger Kit includes:

  • 9 inch hook and loop strap
  • Universal hanger clip
  • Hook hanger for non magnetic surfaces
  • Strong magnet

Dual Pressure Modules
700PD2700PD2 Dual Pressure Module
700PD3700PD3 Dual Pressure Module
700PD4700PD4 Dual Pressure Module
700PD5700PD5 Dual Pressure Module
700PD6700PD6 Dual Pressure Module

Vacuum Pressure Modules
700PV3700PV3 Vacuum Pressure Module
700PV4700PV4 Vacuum Pressure Module

Temperature
700TC2700TC2 Thermocouple Plug Kit 700TC2
80CJ-M80CJ-M type J Male Mini-Connectors
80CK-M80CK-M type K Male Mini-Connectors
80PJ-180PJ-1 Bead Probe
80PJ-EXT80PJ-EXT Extension Wire Kit
80PK-180PK-1 Bead Probe
80PK-2480PK-24 SureGrip Air Temperature Probe
80PK-2580PK-25 SureGrip™ Piercing Temperature Probe
80PK-2680PK-26 SureGrip™ Tapered Temperature Probe
80PK-980PK-9 General Purpose Probe
80PK-EXT80PK-EXT Extension Wire Kit
80PT-2580PT-25 SureGrip Piercing Temperature Probe
80PT-EXT80PT-EXT Extension Wire Kit
80PK-2280PK-22 SureGrip™ Immersion Temperature Probe
80PK-2780PK-27 SureGrip™ Industrial Surface Temperature Probe
80PK-3A80PK-3A Surface Probe
80PK-880PK-8 Pipe Clamp Temperature Probe

Test Leads
TL220

SureGrip™ Industrial Test Lead Set includes:

  • AC220 SureGrip™ Alligator Clip Set
  • TP220 SureGrip™ Industrial Test Probe Set
  • TL224 SureGrip™ Silicone Test Lead Set (straight to right)
  • One year warranty
TL71TL71 Premium Test Lead Set
TL940TL940 Mini-Hook Test Lead Set
TL950TL950 Mini-Pincer Test Lead Set
        
Home  |   Site Map  |   Fluke Corporation  |  Safety Notices
Privacy Statement  |  Terms of Use   |  Terms and Conditions of Sale  |  Terms and Conditions of Service
© 1995 - 2018 Fluke Corporation