Keeping your world up and running.
Home  |  Products  |  Process Calibration Tools  |  Loop Calibrators  |  

Fluke 789 ProcessMeter™

Contact Me
Request A Demo
Fluke 789 ProcessMeter™

Fluke Connect®

Learn more about Fluke Connect »

Now compatible with Fluke Connect® App

The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and the wireless data logging capabilities of Fluke Connect® with ShareLive™ video call (sold separately), process technicians can now do a lot more while carrying a lot less. And with its built-in, selectable 250 ohm HART® resistor, it eliminates the need to carry a separate resistor with you.

Features of the Fluke 789:

  • 24 V Loop power supply
  • Very large dual display
  • Enhanced backlight with 2 brightness settings
  • 1200 ohm drive capability on mA source
  • HART mode setting with loop power and a built-in 250 ohm resistor
  • 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
  • Externally accessible fuses for easy replacement
  • Infrared-port to process data in FlukeView Forms (V2.1) software

Fluke 789 features that are also included in the Fluke 787:

  • Precision 1000 V, 440 mA True-RMS digital multimeter
  • 0.1% dc voltage accuracy
  • 0.05% dc current accuracy
  • Frequency measurement to 20 kHz
  • Min/Max/Average/Hold/Relative modes
  • Diode Test and Continuity Beeper
  • Simultaneous mA and % of scale readout
  • 20 mA DC current source / loop calibrator / simulator
  • Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
  • Externally accessible battery for easy battery changes

Safety conformance

Meets 1000 Volt EN61010-1 CAT III standards and 600 Volt EN61010-1 CAT IV standards.

Specifications
Current measurement Range 0-1 A AC or DC
Resolution 1 mA
Accuracy 0.2% + 2 LSD (DC)
Range 0-30 mA
Resolution 0.001 mA
Accuracy 0.05% + 2 lSD
Current sourcing Range 0-20 mA or 4-20 mA
Resolution 0.05% of span
Drive capability 24 V Compliance or 1200 Ω @ 20 mA
Frequency To 19.999 kHz, 0.005% + 1 LSD
Continuity Beeps for resistance < 100 Ω
Voltage measurement Range 0-1000 V AC (true-rms) or DC
Resolution 0.1 mV to 1.0 V
Accuracy 0.1% Rdg + 1 LSD (VDC)
Resistance measurement To 40 MΩ, 0.2% + 1 LSD
Diode test 2.0 V shoes diode voltage drop
Display current and % of span Yes
Auto Step, Auto Ramp Yes

Environmental Specifications
Operating temperature -20 ºC to 55 ºC
Storage temperature -40 ºC to 60 ºC
Humidity (without condensation) 95% up to 30 ºC
75% up to 40 ºC
45% up to 50 ºC
35% up to 55 ºC
Temperature coefficient 0.05 x (specified accuracy) per ºC (for temperatures < 18 ºC or > 28 ºC)

Safety Specifications
Electrical safety Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92
Overvoltage category IEC 1010-1 CAT III 1000 V
IEC 1010-1 CAT IV 600 V
Maximum voltage 1000 V rms

Mechanical and General Specifications
Size 50 x 100 x 203 mm (1.25" H x 3.41"W x 7.35" L)
Weight 610 g (1.6 lbs)
Batteries 4 AA alkaline batteries
Warranty 3 years
Battery life 140 hours typical (measurement), 10 hours typical (sourcing 20 mA)
Shock and vibration Random, 2 g, 5-500 Hz
1 meter drop test
Model NameDescription
Fluke 789Fluke 789 ProcessMeter™
Includes:
  • Fluke 789 ProcessMeter
  • AC175 Alligator Clips
  • Four (4) AA 1.5 V alkaline batteries (installed)
  • TL71 safety-designed test lead set

Clips
AC220AC220 SureGrip™ Alligator Clips
AC280AC280 SureGrip™ Hook Clips
AC283AC283 SureGrip™ Pincer Clips
AC285AC285 SureGripTM Alligator Clips
AC87AC87 Heavy Duty Bus Bar Clip Set
BP980BP980 Double Banana Plug Kit

Test Probes
TP38TP 38 Slim Reach Test Probe Set
TP1TP1 Slim Reach Test Probe Set
TP2TP2 Slim Reach Test Probe Set
TP220TP220 SureGrip™ Industrial Test Probes
TP4TP4 Slim Reach Test Probe Set
TP74TP74 Lantern Tip Test Probe Set
TP80TP80 Electronic Test Probe Set
TP912TP912 Replacement Tips for TL910
TP920TP920 Test Probe Adapter Kit

Cases and Holsters
C100C100 Universal Carrying Case
C125C125 Meter Case
C510C510 Leather Meter Case
C781C781 Meter Case
CXT80CXT80 Extreme Case
C25C25 Large Soft Case for DMMs
CAMO-C25


CAMO-C25/BD


CAMO-C25/WL


CAMO-C25/WD


CAMO-C25/FO


Camouflage Carrying Case for Fluke Meters
(DESERT DIGITAL)

Camouflage Carrying Case for Fluke Meters
(BLUE DIGITAL CAMO)

Camouflage Carrying Case for Fluke Meters
(WOODLAND CAMO)

Camouflage Carrying Case for Fluke Meters
(WOODLAND DIGITAL)

Camouflage Carrying Case for Fluke Meters
(FOREST CAMO)

TPAK

Fluke TPAK ToolPak™ Magnetic Meter Hanger Kit includes:

  • 9 inch hook and loop strap
  • Universal hanger clip
  • Hook hanger for non magnetic surfaces
  • Strong magnet

Current Clamps
i1010i1010 AC/DC Current Clamp
i200i200 AC Current Clamp
Fluke i410AC/DC Current Clamp

Fiber Optics
FOM Fiber Optic Meter FOM Fiber Optic Meter
FOS-850FOS-850 Fiber Optic Light Source Fiber Optic Light Sources
FOS-850/1300FOS-850/1300 Fiber Optic Light Source Fiber Optic Light Sources

High Voltage Probes
80k-1580K-15 High Voltage Probe
80K-4080K-40 High Voltage Probe
80K-680K-6 High Voltage Probe

Software
FlukeView FormsFlukeView Forms Software with cable

Test Leads, Probes and Clips
85RF85RF High Frequency Probe
TL80A

Fluke TL80A Basic Electronic Test Lead Kit Includes:

  • One pair (red, black) each 1 meter long silicone test lead set, alligator clip and probe tip extender
  • C75 soft carrying case
  • One year warranty

Pressure
PV350PV350 Pressure Vacuum Module

Temperature
80PK-2480PK-24 SureGrip Air Temperature Probe
80PK-2680PK-26 SureGrip™ Tapered Temperature Probe
80T-150UA80T-150U Universal Temperature Probe
80TK80TK Thermocouple Module

Test Leads
TL220

SureGrip™ Industrial Test Lead Set includes:

  • AC220 SureGrip™ Alligator Clip Set
  • TP220 SureGrip™ Industrial Test Probe Set
  • TL224 SureGrip™ Silicone Test Lead Set (straight to right)
  • One year warranty
TL223TL223 Electrical Test Lead Set
TL224TL224 SureGrip™ Insulated Test Leads
TL71TL71 Premium Test Lead Set
TL81ATL81A Deluxe ElectronicTest Lead Kit
H900H900 Test Lead Holder
TL27TL27 Heavy Duty Test Lead Set
TL221TL221 SureGripTM Test Lead Extension Kit
TL222TL222 SureGripTM Silicone Insulated Test Leads
TL238TL238 SureGrip™ Test Lead Set for High Energy Environments
TL26ATL26A 60 in. 5-Way Test Lead Set
TL28ATL28A Automotive Test Lead Set
TL40TL40 Retractable Tip Test Lead Set
TL75TL75 Hard Point™ Test Lead Set
TL76TL76 All-in-one Test Lead Set
TL910TL910 Electronic Test Probe Set
TL930TL930 Patch Cord Set (60 cm)
TL932TL932 Patch Cord Set (90 cm)
TL935TL935 Patch Cord Kit (60, 90, 120 cm)
TL940TL940 Mini-Hook Test Lead Set
TL950TL950 Mini-Pincer Test Lead Set
TL960TL960 Micro-Hook Test Lead Set
TL970TL970 Hook and Pincer Kit

Fluke Connect® SmartView® desktop software is available in all countries but Fluke Connect system is not. Check with your local Fluke distributor.

All trademarks are the property of their respective owners. Smart phone, wireless service and data plan not included with purchase. First 5 GB of storage is free. Compatible with iPhone 4s and up running iOS 8 or higher, iPad (in an iPhone frame on iPad) and Galaxy S4, Nexus 5, HTC One running Android™ 4.4.x or higher. Apple and the Apple logo are trademarks of Apple Inc. registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.

        
Home  |   Site Map  |   Fluke Corporation  |  Safety Notices
Privacy Statement  |  Terms of Use   |  Terms and Conditions of Sale  |  Terms and Conditions of Service
© 1995 - 2018 Fluke Corporation