English

Fluke Calibration 6102/7102/7103 Micro-Bath

Fluke Calibration 6102/7102/7103 Micro-Bath is rated 3.0 out of 5 by 2.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 24.19ms
  • REVIEWS, PRODUCT
  • Fluke Calibration 6102/7102/7103 Micro-Bath
  • Fluke Calibration 6102/7102/7103 Micro-Bath

Key features

Hart Scientific manufactures these Micro-Baths for calibration of thermometers and sensors that do not fit in block calibrators.

Product overview: Fluke Calibration 6102/7102/7103 Micro-Bath

Portable and extremely stable

  • World’s smallest portable calibration baths
  • Calibrates sensors of any size or shape
  • Stability to ±0.015 °C
  • Ranges from –30 °C to 200 °C

Need portability and extreme stability? Fluke Calibration Micro-Baths have both. We invented the Micro-Bath. And, while many have tried to duplicate it, none of them use proprietary Fluke Calibration controllers, so none of them deliver performance like a Fluke Calibration bath. Micro-Baths can be used anywhere for any type of sensor. The 6102 weighs less than 4.5 kg (10 lb.), with the fluid. It’s lighter and smaller than most dry-wells, has a spill-proof lid, and is easier to carry than your lunch. You can take it where you need to go without carts or excessive effort. Micro-Baths can even be transported with the fluid in them.

Wherever you go with your Micro-Bath, you can count on its performance. Each model is stable to ±0.03 °C or better, depending on the fluid you use. Uniformity is ±0.02 °C or better for low uncertainties using a reference thermometer. Display accuracy has been improved to ±0.25 °C for quick calibrations without a reference thermometer. In short, you get the stability and precision of a liquid bath in a dry-well-sized package. Don’t be fooled by competitors who pour oil into a dry-well and call it a bath. Micro-Baths are maximized for true fluid-bath performance.

With a 48 mm (1.9-inch) diameter, 140 mm (5.5-inch) deep tank, a Micro-Bath can calibrate any type of sensor including short, square, or odd-shaped sensors. The problems of fit and immersion are virtually eliminated by using a fluid medium rather than a dry-block calibrator. Micro-Baths are perfect for liquid-in-glass and bimetal thermometers.

The 6102 has a temperature range from 35 °C to 200 °C, the 7102 covers –5 °C to 125 °C, and the 7103 extends from –30 °C to 125 °C. Stability, uniformity, and accuracy specifications cover the entire range for each bath, not just the best temperature.

All Micro-Baths have RS-232 ports and can be used with MET/TEMP II software (described on page 81). Also included are contacts to calibrate a thermal switch, eight set-point memory storage, ramp-rate adjust, and over-temperature safety cutout.

You may have noticed we haven’t touted our CFC-free refrigeration. Yes, cold Micro-Baths are CFC-free, and also compressor-free. That’s right—no heavy, noisy compressor to lug around. We achieve our temperature range and stability with only one moving part. This means more durability and less weight. Fluke Calibration manufactures and sells temperature calibration baths of every size and shape, and now we have the smallest and lightest baths in the industry to go with the dozens of other models we make.

Look at the specs, price, and value of these portable instruments and you’ll know why Fluke Calibration is the number-one company in this business.

Specifications: Fluke Calibration 6102/7102/7103 Micro-Bath

Specifications610271027103
Range35°C to 200°C (95°F to 392°F)–5°C to 125°C (23°F to 257°F)–30°C to 125°C (–22°F to 257°F)
Accuracy±0.25°C±0.25°C±0.25°C
Stability±0.02°C at 100°C (oil 5013)
±0.03°C at 200°C (oil 5013)
±0.015°C at –5°C (oil 5010)
±0.03°C at 121°C (oil 5010)
±0.03°C at –25°C (oil 5010)
±0.05°C at 125°C (oil 5010)
Uniformity±0.02°C±0.02°C±0.02°C
Resolution0.01°C/°F0.01°C/°F0.01°C/°F
Operating temperature5°C to 45°C5°C to 45°C5°C to 45°C
Heating time25°C to 200°C: 40 minutes25°C to 100°C: 30 minutes25°C to 100°C: 35 minutes
Cooling time200°C to 100°C: 35 minutes25°C to 0°C: 30 minutes25°C to –25°C: 45 minutes
Well size64 mm dia. x 140 mm deep (2.5 x 5.5 in) (working area is 48 mm [1.9 in] in diameter)
Size (W x H x D)14 x 26 x 20 cm
(5.5 x 10.38 x 8 in)
18 x 31 x 24 cm
(7.2 x 12 x 9.5 in)
23 x 34 x 26 cm
(9 x 13.2 x 10.5 in)
Weight4.5 kg (10 lb) with fluid6.8 kg (15 lb) with fluid9.8 kg (22 lb) with fluid
Volume0.75 L (1.6 pints)0.75 L (1.6 pints)1.0 L (2.11 pints)
Power115 V AC (±10%), 2.3 A or 230 V AC (±10%), 1.1 A, switchable, 50/60 Hz, 270 W115 V AC (±10%), 1.8 A or 230 V AC (±10%), 0.9 A, switchable, 50/60 Hz, 200 W94–234 V AC (±10%), 50/60 Hz, 400 W
Computer interfaceRS-232 included
NIST-traceable calibrationData at 50°C, 100°C, 150°C, and 200°CData at –5°C, 25°C, 55°C, 90°C, and 121°CData at –25°C, 0°C, 25°C, 50°C, 75°C, 100°C, and 125°C

Models: Fluke Calibration 6102/7102/7103 Micro-Bath

Fluke 6102
Fluke Calibration 6102 Micro-Bath
Micro-Bath, 35°C to 200°C
Find a distributor

Includes:

  • Transport seal lid
  • 2082-M test lid
Fluke 7102
Fluke Calibration 7102 Micro-Bath
Micro-Bath, –5°C to 125°C
Find a distributor

Includes:

  • Transport seal lid
  • 2085 test lid
Fluke 7103
Fluke Calibration 7103 Micro-Bath
Micro-Bath, –30°C to 125°C
Find a distributor

Includes:

  • Transport seal lid
  • 2085 test lid

will the 7103 do both hot and cold or just one temp

Asked by: mark 1966
  • y_2024, m_3, d_25, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_US, sid_4651131306036, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 23.97ms
  • QUESTIONS, PRODUCT
Rated 5 out of 5 by from Another great Fluke product. We use the Fluke 6102 and 7102 micro baths for both shop bench calibrations and field calibrations. We have been using these for several years now with no issues. We also use the extensions for long RTD lengths. We also lone ours out to sister plants for calibrations and they have held up well to the traveling. The only draw back I may have is that if you are calibrating an instrument with a short RTD and a 2" tri-clamp. It is challenging to get the oil where you need it in fill and temp without spilling.
Date published: 2017-04-06
Rated 1 out of 5 by from Very expensive and very undependable I've been using this model 6102 for years, multiple units, with last one purchased 2 years ago or so. They ALL have failed, repeatedly. The primary failure has been the lower fan assembly. It's made if very delicate plastic and has a fairly magnet glued to it to rotate the stir stick. Sometimes the flimsy fan housing breaks apart, and sometimes the whole assembly just won't turn. It is woefully inadequate for the task. It's very difficult to replace the assembly, and sometimes a new part will fail immediately. The unit I'm using now stops stirring at random times, and as very hard to get going again. And today the upper cooling fan failed. I use this unit very seldom, less than a dozen times per year, and it has acted like it was on its last legs from almost day one. This unit is not worth 1/10 of the price, in my opinion. Fluke makes some great stuff, but this isn't one of them.
Date published: 2016-02-08
  • y_2024, m_3, d_24, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_4651131306036, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 25.76ms
  • REVIEWS, PRODUCT
Please enable cookies to view product reviews.