Keeping your world up and running.
Home  |  Products  |  Accessories  |  Current clamps  |  

80i-110s AC/DC Current Probe (100 A)

 80i-110s
AC/DC Current clamp

The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.

  • Current Range: 0.1 to 100A DC or 0.1 to 70A AC
  • Basic Accuracy (DC to 1kHz):
    100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA
    10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA
    40A to 80A +/- 12% of reading + 50mA
    80 to 100A +/- 15% of reading
  • Output Signal: 10A range: 100mV/A | 100A range: 10mV/A
  • Bandwidth: 1Hz to 20kHz
  • Working Voltage: 600V AC rms
  • Maximum Conductor Size: 11.8 mm (.46 inch) diameter
  • Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
Specifications
Nominal current range
 10 A, AC/DC
 100 A, AC/DC
Continuous current range
 0.1 A - 10 A AC/DC
 1 A - 100 A AC/DC
Maximum Non-Destructive Current
 140 A - 2 kHz
Lowest measurable current
 0.1 A
Basic Accuracy
 3% + 50 mA (@ 10 A)
 (% reading + floorspec)
Useable frequency
 DC - 100 kHz
Output level(s)
 100 mV/A
 10 mV/A
Zero error adjustment
 Yes

Safety Specifications
Safety
 CAT II, 600 V
 CAT III, 300 V
Maximum voltage
 600 V

Mechanical & General Specifications
Warranty
 1 year
Battery Life
 9 V, 55 h
Maximum conductor diameter
 11.8 mm
Output cable length
 1.6 m
BNC Adapter
 Yes
Model NameDescriptionPrice List
80i-110s80i-110s AC/DC Current Probe (100 A)Price List
Home   |   Site Map   |   Fluke Corporation   |   Safety Notices
Privacy Statement   |   Terms of Use  |   Terms and Conditions of Sale
© 1995 - 2014 Fluke Corporation