Accurate and repeatable to ±0.05 °C over its full range, the 1552A “Stik” Thermometer is the new “gold standard” of industrial temperature calibration.
Get accurate, precise measurements. Portable, lightweight power analyzer with 10 hours of battery life.
The Fluke CNX™ 3000 Wireless Multimeter lets you work on electrical panels faster, safer, easier. Connect remote modules, view readings from a distance.
The Fluke 1623-2 and 1625-2 GEO Earth Ground Testers offer data storage and download capabilities via USB port. World class accessories will simplify and speed up testing time.
The Fluke 568 two-in-one contact and non contact thermometer can stand up to tough industrial, electrical, and mechanical environments.
The a3004 FC Wireless DC Current Clamp Meter is a fully functional current clamp meter that wirelessly relays measurements to other Fluke Connect® enabled master units.
Combine the functions of a power analyzer, power quality logger, scope, data logger, and clamp meter, for monitoring and troubleshooting electrical loads
AC/DC current module that wirelessly relays measurements from current clamp accessories to other Fluke Connect® enabled master units
A fully functional true-rms current clamp meter that wirelessly relays measurements to other Fluke Connect® enabled master units
Log and analyze measurement inside a closed cabinet.
Detect and record parameters including RMS average, transients, flicker and harmonics with Fluke VR1710 Single Phase Voltage Quality Recorder.
The a3003 FC wirelessly relays measurements from current clamp accessories to other Fluke Connect® enabled master units.
Compact power analyzer. Take precision measurements of 1 or 3 phase current and voltage, harmonics analysis, and FFT analysis.
Record, monitor and evaluate power quality disturbances with the Fluke 1750 including voltage, current, harmonics, transients, waveforms and flicker.
Fluke's 3000 FC Series Wireless Multimeter puts wireless test tools, not your body, near live electrical panels. Improve safety and efficiency with this tester.
Record three-phase power quality monitoring for power quality disturbances with the new Fluke 1750 Power Recorder and the Fluke Power Analyze software.
Record three-phase power quality monitoring for power quality disturbances with the new Fluke 1750 Power Recorder and the Fluke Power Analyze software.
A fully functional AC voltage meter that wirelessly relays AC voltage measurements to other Fluke Connect® enabled master units
Highest accuracy 6-phase power analyzer. Measure voltage, current, and power harmonics.
The easy-to-use data management and reporting solution.
Industrial and commercial professionals can save time and money by identifying problems before they become costly failures with the Ti105 a3001 FC iFlex® Kit.
The VT04 Visual IR Thermometer HVAC Kit includes the VT04, a 902 Clamp Meter and a 116 Digital Multimeter to troubleshoot and diagnose HVAC problems.
The Fluke 3000FC/TPAK Combo Kit includes the Fluke 3000FC True-rms Wireless Multimeter, TL75 test leads, ToolPak™ magnetic meter hanger, and C35 soft case.
Fluke's 3000 FC Series Wireless Multimeter puts wireless test tools, not your body, near live electrical panels. Improve safety and efficiency with this tester.
Fluke 3000 FC True-rms digital multimeter with industrial-strength test lead probe kit in a compact lightweight soft case.
The VT04 Visual IR Thermometer Maintenance Kit includes the VT04 and 1507 Insulation Resistance Tester – two products that are ideal for troubleshooting and preventive maintenance.
The VT04 Visual IR Thermometer Maintenance Kit includes the VT04 and 1507 Insulation Resistance Tester – two products that are ideal for troubleshooting and preventive maintenance.
The Fluke 1623-2 Earth Ground Tester Kit offers fast, accurate earth ground tests using all 4 test methods. World class accessories speed set up and test time.
Optimize Solar Performance: PVA-1500HE2 PV Analyzer, 1587 FC Insulation Multimeter, 393 FC Clamp Meter & 87V Multimeter
Optimize Solar Performance: PVA-1500HE2 PV Analyzer, 393 FC Clamp Meter & 87V Multimeter
Optimize Solar Performance: PVA-1500HE2 PV Analyzer & 1537 Insulation Tester 2500V
Optimize Solar Performance: PVA-1500HE2 PV Analyzer & TiS75+ Thermal Camera
4G LTE communications module for Fluke 1773, 1775 and 1777 Power Quality Analyzers
The 975 gathers ten fundamental IAQ parameters: Temperature, Humidity, Dew Point Temperature, Web Bulb Temperature, Carbon Dioxide, Carbon Monoxide, Air Velocity, Air Volume, and Percentage of Outdoor Air (calculated from temperature or CO2). This application note reviews those parameters and the associated functions on the 975. For more detailed information, see other app notes from the Fluke HVAC/IAQ library.
Information on the role of thermal imagers in preventive maintenance programs, including cost savings, return on investment (ROI), and the inspection process. Included are common examples of infrared camera applications.
Preventing motor failure problems will extend the operating life of system equipment. Insulation resistance testers can be used to determine the integrity of windings or cables in motors, transformers, switchgear, and electrical installations.
To determine the existing equipment's capacity, factor in the incoming conductor size, the ratings of the equipment, and space for new circuits. To determine present loading, you'll need to either precisely calculate the existing loads, or measure them.
Transformers supplying nonlinear loads should be checked periodically to verify operation within acceptable limits. Transformers are also critical to the integrity of the grounding system.
Motor insulation testing of motor windings, baselining and data collection is an important step in preventive maintenance. Fluke insulation testing tools such as the Fluke 1587 FC Insulation Multimeter is an easy way to collect data and analyze trends.
Understand how to use under-utilized functions on your DMM such as Fast/Peak and Min/Max.
A ski resort near Silverthorn, CO., depends on its snowmaking capacity to augment nature's snowfall, especially during drought years.
After experiencing some nuisance tripping of breakers in the subpanel feeding the second floor of this industrial building, we installed a Fluke 1750 Power Recorder at the subpanel to gather information about power usage.
You could almost call it a happy accident. During a routine job at a large industrial facility, an electrical maintenance worker set a plastic kit on top of a nearby transformer.
Maintenance electrical specialist Mark Newport was in the process of installing new electronic power factor correction units at multiple motor control centers (MCCs) to improve power quality, protect equipment and reduce costs.
Astronomers from the University of New South Wales (UNSW) in Australia have been working in Antarctica's interior since 1996. In collaboration with astronomers from France, Italy and the United States, they're seeking the perfect location for the next generation of deep-space telescopes.
In most facilities, lighting is a major element of operating cost. Part of that cost is due to energy, and part is due to maintenance.
The engineer carries a Fluke 43B on all trouble calls, because it provides a graphical display that allows customers to see a picture of the problem.
A small city gets its water from a mountain lake 30 miles away. A pumping system at the lake brings water up a short incline and into a long gravity pipeline that feeds the city's water distribution system.
One winter morning, the electrician received a call from a local school. The caller said a transformer supplying power to three portable classrooms was making a chattering noise, as if something were loose inside.
This case history is a classic example of the importance of a systematic approach to solving a problem. It involves a contractor who works with several high-technology manufacturing plants.
Power quality is an estimate of how stable the electrical system is, often this is described as “power quality health.” This is measured on three-phase electrical systems using instrumentation that considers several variables. Troubleshooting power quality issues will help your facility save money by optimizing energy use and protect equipment from future damage. The first step to evaluating power quality is to capture data from equipment, infrastructure, and the service panel. The primary effects...
Understanding the relationship between dry bulb temperature, wet bulb temperature, relative humidity, and dew point temperature is essential in all facets of air conditioning. These psychrometric processes play an especially important role in building and materials integrity, occupant health and comfort, and overall indoor air quality.
Mac McArthur performs power quality studies for commercial, industrial, and residential clients.
To upgrade your 729 to the latest firmware, follow these simple instructions: Download Fluke−729 Version firmware upgrade and save the firmware upgrade file. Ensure your Fluke 729 is connected to your Windows PC computer via USB cable and using the battery charger for power. Run the file and follow the instructions for doing the update. Do not turn off the PC or the 729 while the update is in progress. Version 0.54 adds the following enhancements: Allows you to increase the accuracy of automatic...
Access the latest software updates for TruTest™ Data Management and Reporting Software
A new DD Library is now available for your Fluke 154 HART Communicator. To update your Fluke-154 with the latest DD Library please follow these instructions. NOTE: Do not uninstall your existing application prior to installing the new DD Library. FlukeHART DD Update App Installation Download the DD Library file from this link: FlukeHART DD Update App Copy the file to your Android device and tap the file name to install. You will need to enable installs from unknown sources. Launch the FlukeHART...
A new software update is now available for your Fluke 154 HART Communicator. To update your mobile app with the latest version please follow these instructions. IMPORTANT: Do not uninstall your existing application prior to installing the new app. FlukeHART App v 2.2.4.5 Installation Instructions: Download the FlukeHART App v. 2.2.4.5 Copy the file to your Android tablet and tap the file name to install. You will need to enable installs from unknown sources. Launch the FlukeHART App to install the...
Firmware release V1.3 (.swu) Firmware release V1.3 Readme (.pdf) For Fluke 190 Series III and MDA 550 series III instruments with firmware V1.0 or higher. For a list of improvements associated with this firmware release please download the firmware "Readme" file. GPL Offer
Fluke Connect Desktop for 1550/1555FC (.msi) » Download the Fluke Connect Desktop companion app for your Fluke 1550FC or 1555FC here. Fluke Connect Desktop allows Fluke 1550FC or Fluke 1555 FC users to efficiently create inspection reports and temperature compensated Pi/Dar Charts. Fluke will not be liable for any loss, whether such loss is direct, indirect, special or consequential, suffered by any party as a result of their use of Fluke Connect Desktop. Any downloading or uploading of material...
Fluke Energy Analyze Plus Fluke Energy Analyze Plus application software for download, analysis and reporting. Used with Fluke 1730; Fluke 1732, 1734, 1736, 1738; and Fluke 1742, 1746, 1748. (Compatible with Windows 7, 8 and 10). Fluke 1730 v1.3 Firmware File (.bin) To upload directly to the Fluke 1730 from USB create a directory titled "Fluke1730" on the USB stick and copy the firmware file to that directory location. Plug the USB stick into the instrument, if the firmware is a later version...
The firmware update for the 279 FC allows you to save and view images on the meter itself. Images can still be transferred via Fluke Connect to your smart phone or tablet. The new firmware helps save time on the job by allowing you to confirm that images were captured correctly before sharing or leaving the work area. Existing images which are on your 279 FC will not be deleted. When the firmware upgrade is complete you will be able review these existing images on your 279 FC Thermal Multimeter....
Firmware release V1.14 For Fluke 123B, 124B and 125B ScopeMeter Test Tools V1.14 software update had the following improvements: Fixed issue that caused unit to show spikes on waveform in fastest timebase modes Improved Bushealth function for ModBus signals Fixed bug that caused unit to reboot in Recorder mode when changing F2=View setting Fixed issue that caused unit to reboot in BusHealth mode for AS-I bus Fixed issue that some events are not shown when selecting Normal View mode Fixed issue for...
Dear Fluke Customer: Fluke is voluntarily recalling its 190 Series ScopeMeter®100MHz and 200MHz 4 Channel Hand Held Oscilloscopes that contain firmware version V10.40. This includes all units manufactured between February 5, 2012 and April 3rd 2012 and have a serial number range of 1954xxxx to 2009xxxx, and all units upgraded to firmware version V10.40 after February 5, 2012. Four channel models with the latest firmware (V10.40) may display the decimal point of the measurement value in the wrong...
Some Norma 4000 and 5000 instruments require attention due to a calibration error of the external probe (EXT.Shunt- BNC) inputs of instruments caused by incorrect data being written into the instrument at production. This error only affects the current probe inputs of the instruments in the 100mV range and only specific serial numbers (you will have been contacted by Fluke if this affects you). Please follow the steps below to fix the calibration data for all customers if you have been contacted...
Fluke CNX sw3000 software works with the CNX pc3000 PC Adapter to wirelessly manage and communicate with Fluke CNX modules. Release 1.0.0.17 Feb 12, 2013 Download software (.exe) GPL Offer
Update that enables analysis to the most recent 2010 EN50160 standard. This software verifies that your 1740 series has the latest firmware installed, and if not, enables you to upgrade. PQLog V2.2.3 (.exe) USB driver for Vista (.exe) USB driver for Windows XP (.zip) Release notes (.pdf) GPL Offer
Firmware Release V11.46 » Firmware Release V11.46 Readme » For Fluke 190 Series II, 2 and 4 Channel instruments with firmware version V09.00 onwards. The firmware release V11.46 has the following improvements: Firmware version V11.45 For Fluke 190 Series II, 2 and 4 Channel instruments with firmware version V09.00 onwards. The firmware release V11.45 has the following improvements: Resolved issue with data storage of set-up files on USB-flash drives Firmware version V11.44 The firmware release...
Fluke 805 Vibration Meter Firmware and Trending Template To copy the template: Turn on the PC or Laptop and copy the template you have downloaded from the link above. To export data: Connect the USB cable between the PC and the Meter. Turn on the Meter. A pop-up menu opens to show that the new hardware is found. -OR- Go to My Computer and select the removable disk that is the Meter. Double-click to see the contents of the disk. Make a copy of the TXT-format file from the Meter...
Fluke 287 multimeters beginning with serial number 42700001 and Fluke 289 multimeters beginning with serial number 42830001 ship with firmware version 1.41. Older versions of the Fluke 287 or 289 with lower serial numbers cannot be upgraded to version 1.41 Fluke 287 Firmware update version 1.16 Owners of Fluke 287 multimeters with serial number 42700000 or LOWER can update to firmware version 1.16. These multimeters are NOT upgradable to any firmware higher than 1.16. To upgrade your 287 to the latest...
Software Update IMPORTANT NOTICES The Viewer software may or may not work on all computers Sometimes the Viewer software installs and works fine Sometimes the customer’s software / IT group can get it working Sometimes the customer’s software / IT group can not get it working All of the 810 features / capabilities will function properly without the Viewer software 810 Viewer software allows users to transfer data / results from 810 to the PC to view what is on the 810, backup the database,...
Download Fluke Connect Software. Fluke Connect Software (.exe) GPL Offer
FlukeView Forms Basic 3.8.4 (.exe) FlukeView Forms plus Designer 3.8.4 (.exe) Fluke 975 USB Drivers 1.5.0.22 (.zip) FlukeView Forms Software. Anyone with FlukeView Forms version 3.0 or later can receive a free software update by clicking the links and downloading the software from this site. Basic users would select the "Basic" link and users with the complete package would select the "plus Designer" link. If your present FlukeView Forms software is older than version 3.0 (less than 3.0) you must...
New Firmware update for the Fluke 985 Airborne Particle Counter A new free firmware update (version V2.05); released in August 2014 for the Fluke 985 Airborne Particle Counter is now available. This firmware update provides a performance upgrade to a memory issue which could result in random resets/reboot. This notice explains how to obtain the free firmware update and explains steps on how to conduct the update. How to obtain the free firmware update Download the update file (FWUpdate.bin) to a...
This case study describes how fire fighters in Whitehorse, Canada are using the dual temperature mode and downloading capabilities of the 52-II contact thermometer in burning buildings for training sessions.
This sheet explains the value of insulation resistance testing and provides a chart to help the user interpret their readings. Depending on the degree of change from a previous reading, a low insulation resistance test measurement can indicate the need for repair. NOTE: This version is designed for downloading. A separate, tri-fold laminate card of this chart is available under literature number 2457368.
This card explains the value of insulation resistance testing and provides a chart to help the user interpret their readings. Depending on the degree of change from a previous reading, a low insulation resistance test measurement can indicate the need for repair. NOTE: This version is designed as a laminated printed piece. A separate, downloadable version is available under literature number 2465548.
Several Fluke DMMs, digital thermometers, and process meters can log detailed min/max and event data. Fluke View Forms software makes it possible to download data logged over time, from multiple locations and test tools, and analyze it on your desktop computer. Graphs and reports make it easy to spot intermittents and other problematic events that may not be otherwise traceable. Fluke View Forms reports are also an efficient way to document processes to meet regulatory standards.
Several Fluke DMMs, digital thermometers, and process meters can log detailed min/max and event data. Fluke View Forms software makes it possible to download data logged over time, from multiple locations and test tools, and analyze it on your desktop computer. Graphs and reports make it easy to spot intermittents and other problematic events that may not be otherwise traceable. Fluke View Forms reports are also an efficient way to document processes to meet regulatory standards.
Fluke 572 (Precision Infrared Thermometer) Fluke 574 (Precision Infrared Thermometer with Software and Data Logging) The Fluke 572 and 574 precision infrared thermometer are a non-contact diagnostic tools for temperature checks in applications where precise temperature measurements and documentation are vital. Professionals can troubleshoot maintenance problems by measuring surface temperatures of motors, electrical equipment, insulated walls and pipes, heating, ventilation and refrigeration systems all from a safe distance. 574 permits up to 100 points of data-logging that can be downloaded into included software for analysis and reporting.
Find out how to perform a calibration, download the results using Fluke DPC/Track2 Software, and then print out a calibration report using a Fluke 754 Documenting Process Calibrator.