Accurate and repeatable to ±0.05 °C over its full range, the 1552A “Stik” Thermometer is the new “gold standard” of industrial temperature calibration.
The 707Ex is an intrinsically safe loop calibrator for use in explosion endangered areas. The Fluke 707Ex is certified in accordance with the ATEX directive in Zones 1 and 2.
Fluke 725Ex provides an intrinsically safe, simple and powerful multifunction calibration solution
The Fluke 718Ex is a powerful intrinsically safe self-contained portable pressure calibrator for usage in explosion endangered areas.
The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter.
Test and calibrate thermocouples and RTDs
Fluke 721Ex Precision Pressure Calibrator with dual isolated sensors for gas custody transfer applications
The 9144 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.
The 1524 Reference Thermometers from Fluke’s Hart Scientific Division measure, graph, and record PRTs, thermocouples, and thermistors.
For the temperature calibration professional that wants a highly accurate, easy-to-use, single function RTD temperature calibrator the Fluke 712B is the ideal test tool.
Fluke 712 is a lightweight RTD Temperature Calibrator that is EMI tolerant, dust & splash resistant, and features a removable battery door for quick battery changes.
50 models with measurement workloads from 1 inH20 to 10,000 psi.
Fluke 721 Precision Pressure Calibrator with dual isolated sensors for gas custody transfer applications
Fast, accurate test results with 23 ranges of measurements.
Truly portable handheld dry-block temperature calibrators. They’re the smallest, lightest, and most portable dry-wells in the world.
The 3130-G2M Portable Pneumatic Pressure Calibrator is ideal for calibrating pressure transmitters, transducers, gauges and similar devices.
The Fluke Calibration pneumatic calibrators are an easy-to-use alternative to traditional deadweight testers.
Measure and simulate 17 thermocouple types and millivolts
The 9142 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.
The 9143 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.
Translucent accessory hoses allow the technician to easily identify if there is oil or other contaminants in the hose before they get into your calibrator.
Easy to use premium pressure transmitter test hose kit for connection to 1/4" female metric/BSP
Easy to use premium pressure transmitter test hose kits for use with a calibrator or test pump.
Easy to use premium pressure transmitter test hose kit for use with female M20 connections
Easy to use premium pressure transmitter test hose kits for use with a calibrator or test pump
Display pressure readings in any of 10 different pressure units you specify in the calibrator setup
Display pressure readings in any of 10 different pressure units you specify in the calibrator setup
Display pressure readings in any of 10 different pressure units you specify in the calibrator setup
Display pressure readings in any of 10 different pressure units you specify in the calibrator setup
Display pressure readings in any of 10 different pressure units you specify in the calibrator setup
Display pressure readings in any of 10 different pressure units you specify in the calibrator setup
Display pressure readings in any of 10 different pressure units you specify in the calibrator setup.
Display pressure readings in any of 10 different pressure units you specify in the calibrator setup
Contamination Prevention System 20 MPa (3000 psi), P3000 Test Port Connection
Contamination Prevention System 20 MPa (3000 psi), HC20 Test Port Connection
Shielded four conductor cable terminated with a 9-socket D-subminiature connector and a 9-pin D-subminiature connector.
Portable plastic organizer to keep your tools safe
Fluke BP7240 Li-Ion Battery Pack for the 75x Documenting Process Calibrator.
7.5 V DC battery eliminator for operation of calibrator from 120 volt AC line. UL/CSA recognized.
The Fluke 700HTP-2 is a hand operated hydraulic pressure pump designed to generate calibration pressures up to 10,000 psi/690 bar. Designed for use with Fluke-700 series high pressure modules such as the Fluke-700P09, 700P29, 700P30 and 700P31.
The Fluke-700PTP-1 pneumatic test pump is capable of supplying pressures up to 600 psi, 40 bar.
The 4 mA to 20 mA current loop is a common method of transmitting sensor information in many industrial process monitoring applications—typically in systems monitoring pressure, temperature, pH, flow, or other physical factors. These systems employ a two-wire, 4 mA to 20 mA current loop, in which a single twisted-pair cable supplies power to a transmitter and also carries the output signal. The loop’s operation is straightforward: a sensor’s output voltage is first converted to a proportional...
The 4-20 mA current loop has been the standard for signal transmission and electronic control in control systems since the 1950's. In a current loop, the current signal is drawn from a dc power supply, flows through the transmitter, into the controller and then back to the power supply in a series circuit. The advantage is that the current value does not degrade over long distances, so the current signal remains constant through all components in the loop. As a result, the accuracy of the signal...
The Yuengling maintenance team keeps the vintage facility brewing and bottling up to a million barrels of beer yearly. It takes a very lean operation to win against mega-brewers many times Yuengling's size.
What's in your toolbox? Yuengling Tampa Brewery
For more information: Warren Payne PayneSpencer (253) 653-0522 warren@paynespencer.com The 5560A defines a new class of multi-product electrical calibrators with a host of new technologies to meet the demands of modern calibration labs EVERETT, Wash., Jan. 17, 2023 — Calibration technicians are facing increasing workloads with devices that require even more accuracy. The new Fluke Calibration 5560A Multi-Product Calibrator meets the demands of modern workloads by enabling technicians to calibrate...
Many facilities, such as power plants or production facilities, depend on a strong preventive maintenance program. These programs are essential to keep processes running safely and efficiently.
Pressure instrumentation is found in almost every process plant. Verifying the calibration of these instruments is a necessary part of ensuring these instruments deliver accurate measurements to the control system. Calibrating these instruments correctly where installed can often be frustrating, but, it’s a necessary part of optimizing process operations and ensuring plant safety. In many businesses, the measurements taken are how prices are established. Business hinges on everyone involved getting...
ROI for industrial energy efficiency programs. How manufacturing plants can identify energy waste, save on utilities, and industrial energy costs.
How to use data to prove the value of PV and microgrids in order to provide a safer, cheaper, more secure and more reliable distributed energy electric power system.
Today's Fluke Corporation is a sophisticated, diversified company with an international reputation. How did this big-time company, with down-home values, come to be located in small-town Everett, Washington? It's all about coming home…
Fluke News Plus Research Archive Articles
Learn which calibration tools are best for improving optimization and quality in process manufacturing plants including chemical processing, nuclear power, pharmaceutical, pulp and paper.
Troubleshooting 4 to 20 mA (milliamp) process control systems without breaking the loop using Fluke 773 Milliamp Process Clamp Meter
Classic methods for pressure switch testing have been superseded with the introduction of new pressure test tools. Today most pressure switches are tested with a pressure gauge mounted to a pump to supply and measure pressure, and a digital multimeter set to continuity to verify the opening and closing of the switch. The technician or electrician making the test is required to interpret the pressure applied to the switch when the continuity beeper sounds indicating contact closure of the switch....
Gas custody transfer flow computers that calculate flow in pipelines by measuring the differential pressure across a flow restriction, such as an orifice plate or other differential pressure flow device, require special calibration to perform at optimum accuracy.
Whether you're building automobiles or electronic components, processing food, maintaining electrical systems, or making plastic, temperature inspection using infrared (IR) cameras and spot thermometers is becoming one of the quickest, safest ways to accurately inspect electrical, electronic, mechanical, HVAC, and process control systems.
When assessing control valves and their performance, you need to understand the different types of valves and what they can be tested for.
Every process technician knows that the most difficult part about doing calibration in the field is getting all the hoses connected properly. Using the thread seal tape to seal up all the connections and having to take the time to reseal every time you perform calibrations. Not only is that time-consuming, but it could also lead to leak issues that throw off your measurements. In this video we're going to look at the best practices for doing a pressure calibration and what accessories, like fittings...
Pairing a Fluke dry well with a handheld documenting calibrator allows for a complete field temperature sensor calibration solution.
How to perform a verification test on analog vs digital pressure gauges. Both analog and digital process gauges need to be verified to detect errors related to drift, environment, electrical supply, addition of components to the output loop, and other process changes
Fluke DPCTrack2 provides functionality to manage your instruments, testing strategies, calibration results and communication with the Fluke 75x and 74x documenting process calibrators and the 729 documenting automatic pressure calibrator. It also has the ability to generate and print a variety of standard reports related to calibration. If you are installing DPCTrack2 for the first time, and do not have an existing copy installed on your computer please use the following link: Download DPCTrack2™...
Fluke 753 and 754 Documenting Process Calibrator Firmware Upgrade To upgrade your 753 or 754 to the latest firmware, follow these simple instructions: Download firmware version 1.06 or 1.16 depending on which firmware your calibrator is currently using, and save the firmware upgrade file. For calibrators currently running firmware versions 1.00, 1.01, 1.02, 1.03, 1.04 or 1.05 download firmware V1.06 (.exe) For calibrators currently running firmware versions 1.10, 1.11, 1.13, 1.14 or 1.15 download...
Case study on 729 Automatic Pressure Calibrator.
An R&D electronic tech describes using a handheld DMM and temperature calibrator to track temperature over time on food warming devices.
750 series Documenting Process Calibrator Brochure.
Using the Fluke 707Ex Loop Calibrator
A Hart Scientific application note.
Read the reactions from early users of the new 719 Pressure Calibrator.
This data sheet contains product specifications for the Fluke 707 Loop Calibrator
This data sheet contains product specifications for the Fluke 717 30G and 717 100G Pressure Calibrators.
General product information and detailed specifications for the 725Ex Intrinsically Safe Multifunction Process Calibrator
718Ex Intrinsically Safe Pressure Calibrator and Pressure Modules Data Sheet.
Because digital multimeters and process calibrators can be similar in look and feel, it´s possible to grab the wrong device from the tool crib and head into the plant.
Instrumentation/electrical technician Bill Wilcox describes how he used skills developed through JATC training and Fluke process tools to update intrumentation at an Illinois oil refinery.
Case study about using the Fluke 810 Vibration Tester, Fluke 744 Documenting Process Calibrator, Fluke Thermal imager, and Fluke 1735 Three-Phase Power Logger. Measurements include spot-check heat readings, check for constant amount of pressure, check vibration on motor and blower, and calibrate Hart-compatible instruments.
Case study at the National Ignicition Facility (NIF) at the Lawrence Livermore Laboratory describes calibrating equipment for successful laser test shots. Tools include documenting process calibrator, field metrology well, pressure calibrator.
This product tour walks you through the features and functions of the Fluke 719 Electric Pressure Calibrator.
The Fluke 725 Multifunction Process Calibrator is a great balance of power and simplicity allowing you to test and calibrate almost any process parameter without getting bogged down in complicated menus. This product overview shows walks you through the features and functions of the Fluke 725.
This product overview shows the simple user interface of the 709 family of Precision Loop Calibrators that allows users to pick up the 709 or 709H and get right to work. 709 and 709H Loop Calibrators can source mA, simulate mA, measure mA, measure mA while providing 24 V loop power, and measure DC voltage and loop power supplies.
This video overview shows you the basics of operating Fluke 753 or 754 Documenting Process Calibrators.
This video shows you how to calibrate a pressure transmitter using the Fluke 754 Documenting Process Calibrator.
This product overview shows you how to use the HART configuration utilities of the Fluke 754 Documenting Process Calibrator with HART Communications.
This video shows you how to test a Rosemount HART temperature transmitter configured with an RTD input using the Fluke 754 Documenting Process Calibrator.
This video gives a product overview of the Fluke 721Ex Precision Pressure Calibrator.
Learn how to get started with the Fluke 154 HART™ Process Calibration Assistant. The Fluke 154 is a standalone tablet based HART® communication tool. The tablet configured with the "FlukeHART" mobile app utilizes a wireless HART modem that connects directly to the HART transmitter being tested or configured. When you combine your Fluke 154 Communicator with a Fluke 750 Series Documenting Process Calibrator, or a 720 Series Multifunction Process Calibrator you have a complete HART calibration and configuration solution.
Lear how to configure a HART Device with the Fluke 154 HART™ Process Calibration Assistant. The Fluke 154 is a standalone tablet based HART® communication tool. The tablet configured with the "FlukeHART" mobile app utilizes a wireless HART modem that connects directly to the HART transmitter being tested or configured. When you combine your Fluke 154 Communicator with a Fluke 750 Series Documenting Process Calibrator, or a 720 Series Multifunction Process Calibrator you have a complete HART calibration and configuration solution.
Learn how to save a configuration with the Fluke 154 HART™ Process Calibration Assistant. The Fluke 154 is a standalone tablet based HART® communication tool. The tablet configured with the "FlukeHART" mobile app utilizes a wireless HART modem that connects directly to the HART transmitter being tested or configured. When you combine your Fluke 154 Communicator with a Fluke 750 Series Documenting Process Calibrator, or a 720 Series Multifunction Process Calibrator you have a complete HART calibration and configuration solution.
Learn how the Fluke 710 valve testing loop calibrator makes control valve testing easier than ever, and how the valve health quick check function provides at-a-glance diagnostics that tell you whether your control valve is in good, marginal, or bad operating condition from Fluke Process Calibration Tools Product Manager Jim Shields.
In this video, you’ll learn how to perform a Hart calibration on a documenting process calibrator.
This video shows how to measure and source an RTD using the Fluke 754 Documenting Process Calibrator.
In this video a Rosemount 3051 Pressure Transmitter is tested with the Fluke 719 Electric Pressure Calibrator.