|
|
|
|
|
|
|
|
|
Home | Products | Comparison of Ti Series for Electrical/Mechanical
|
|
|
|
|
|
|
|
|
|
|
 |
| | |  | | | | | | | Fluke Ti100 Series Thermal Imagers | |  |  |  | | | Ti100 | Ti110 | Ti125 | ResolutionThe higher, the better | 160 x 120 | 160 x 120 | 160 x 120 | Temp. measurement range | -4 °F to +482 °F
(-20 °C to +250 °C ) | -4 °F to +482 °F
(-20 °C to +250 °C ) | -4 °F to +662 °F
(-20 °C to +350 °C ) | Thermal sensitivity (NETD) The lower, the better | = 0.10 °C at 30 °C target temp (100 mK) | = 0.10 °C at 30 °C target temp (100 mK) | = 0.10 °C at 30 °C target temp (100 mK) | IR-Fusion® viewing mode | IR only | Full IR, picture-in-picture | Full IR, picture-in-picture , AutoBlend™ | Emissivity correction | - | On-board | On-board | Voice annotation | - | Yes | Yes | Optional lenses | - | - | - | Battery | Field replaceable,
rechargeable (1) | Field replaceable,
rechargeable (1) | Field replaceable,
rechargeable (2) | Fluke P3 Series Thermal Imagers for Electrical / Mechanical | |  | | | | | Ti27 | Ti29 | Ti32 | ResolutionThe higher, the better | 240 x 180 | 280 x 210 | 320 x 240 | Temp. measurement range | -4 °F to -1112 °F | -4 °F to -1112 °F | -4 °F to -1112 °F | Thermal sensitivity (NETD) The lower, the better | = 0.05 °C (50 mK) | = 0.05 °C (50 mK) | = 0.045 °C (45 mK) | IR-Fusion® viewing mode | Full IR, picture-in-picture, blending | Full IR, picture-in-picture, blending | Full IR, picture-in-picture, blending | Emissivity correction | On-board | On-board | On-board | Voice annotation | Yes | Yes | Yes | Optional lenses | Yes | Yes | Yes | Battery | Replaceable (2) | Replaceable (2) | Replaceable (2) | Fluke Ti Series Thermal Imagers for Electrical / Mechanical Product Comparison This comparison table highlights the key differences between the models. Use our Product Selection Tool to view a complete spec-by-spec comparison. | |  |  |  | | | Ti9 | Ti10 | Ti25 | ResolutionThe higher, the better | 160 x 120 | 160 x 120 | 160 x 120 | Temp. measurement range | -4°F to +482°F | -4°F to +482°F | -4°F to +662°F | Thermal sensitivity (NETD) The lower, the better | =0.2 °C (200mk) | =0.2 °C (200mk) | =0.1 °C (100mk) | IR-Fusion® viewing mode | IR Only | Full IR, picture-in-picture | Full IR, picture-in-picture, blending | Emissivity correction | In-software only | In-software only | On-board | Voice annotation | - | - | Yes | Optional lenses | - | - | - | Battery | Internal | Internal | Internal | « Return to Thermal Imagers for Electrical / Mechanical | |
|
|
|
|
|
|
|
|
|
|
|