Keeping your world up and running.
Home  |  Products  |  Thermal Cameras and Gas Detectors  |  
This product is discontinued or reclassifiedFluke suggests:
Fluke TiR105 Building Diagnostic Thermal Imager

Fluke TiRx Thermal Imager

Contact Me
Request A Demo
 Fluke TiRx Thermal Imager

Entry-level imager shows building heat losses in highest detail

Our new entry-level TiRx Inspector thermal imager shows up building faults and energy waste instantly – and in unrivalled detail. The 160 x 120 pixel resolution is three times that of other entry-level imagers, showing images on a widescreen format LCD. Just point the imager and pull the trigger – the excellent 0.1 °C (NETD) thermal sensitivity at 30 °C highlights even small temperature differences.

Facility managers, building inspectors and energy assessors can all use the instrument to perform rapid building envelope and roofing inspections for restoration and repair. It shows problems like heat loss from HVAC (Heating, Ventilation and Air Conditioning systems), water leakage from pipes and radiators, air leakage from windows, moisture intrusion in insulation and the location of underfloor heating systems. And you can upgrade the TiRx Inspector to a full-featured Fluke TiR thermal imager with Fluke’s IR-Fusion® for advanced analysis and reporting. IR-Fusion® shows a full thermal image, or one combined with a visual image to pinpoint potential faults.

Fluke TiRx

  • Rugged and reliable: Engineered to withstand a 2 m drop
  • 9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD
  • Temperature range and thermal sensitivity optimized for building diagnostics applications
  • Perfect for any application and budget
  • Excellent thermal sensitivity for seeing even small temperature differences (which could indicate problems)
  • Adjustable hand strap for left- or right-handed users


Detailed specifications
Temperature measurement range (not calibrated below -10 °C)  -20 °C to +100 °C (-4 °F to + 212 °F)
Accuracy  ± 5 °C or 5 % (whichever is greater)
Measurement modes  Smooth auto-scaling and manual scaling
Imaging performance
Field of view  23° x 17°
Spatial resolution (IFOV)  2.5 mRad
Minimum focus distance  Thermal lens: 15 cm (6 in)
Focus  Manual
Image frequency  9 Hz refresh rate
Detector type  160 X 120 focal plane array, uncooled microbolometer
Infrared lens type  20 mm F = 0.8 lens
Thermal sensitivity (NETD)  ≤ 0.1 °C at 30 °C (100 mK)
Infrared spectral band  7.5 μm to 14 μm
Image presentation
Palettes  Ironbow, blue-red, high contrast, grey
Level and span  Smooth auto-scaling and manual scaling of level and span
Minimum span (in manual mode)  2.5 °C (4.5 °F)
Minimum span (in auto mode)  5 °C (9 °F)
Image and data storage
Storage medium  SD memory card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR or 3000 basic (.bmp) IR images
File formats  Non-radiometric (.bmp) or fully-radiometric (.is2)
No analysis software required for non-radiometric (.bmp) files
Export file formats w/SmartView™ software  JPEG, BMP, GIF, PNG, TIFF, WMF, EXIF, and EMF


General specifications
Operating:  -10 °C to 50 °C (14 °F to 122 °F)
Storage:  -20 °C to +50 °C (-4 °F to 122 °F) without batteries
Relative humidity
 10 % to 90 % non-condensing
 9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD with backlight (selectable bright or auto)
Controls and adjustments
 User selectable temperature scale (°C/°F)
 Language selection
 Time/date set
 SmartView™ full analysis and reporting software included
Battery:  Internal rechargeable battery pack (included)
Battery life:  3 to 4 hours continuous use (assumes 50 % brightness of LCD)
Battery charge time using ac adapter/charger or dc car charger:  2 hours for full charge
AC operation/charging
 AC adapter/charger (110 V ac to 220 V ac, 50 Hz to 60 Hz). Charges battery while imager is operating. Universal ac mains adapters included.
Power saving
 Sleep mode activated after 5 minutes of inactivity, automatic power off after 30 minutes of inactivity
Safety standards
CE Directive:  IEC 61010-1: Cat None, Pollution degree 2
Electromagnetic compatibility
EMC directive:  EN61326-1
C-Tick:  IEC/EN 61326
US FCC:  CFR 47, Part 15 Class A
 2 G, IEC 68-2-29
 25 G, IEC 68-2-29 {2 m (6.5 ft) drop, 5 sides}
Dimensions (HxWxL)
 0.27 m x 0.13 m x 0.15 m (10.5 in x 5 in x 6 in)
 1.2 kg (2.65 lb)
IP rating
Calibration cycle
 Two-years (assumes normal operation and normal aging)
Supported languages
 English, Italian, German, Spanish, French, Russian, Portuguese, Swedish, Turkish, Czech, Polish, Finnish, Simplified Chinese, Traditional Chinese, Korean, and Japanese
Model NameDescriptionPrice List
Fluke TiRx Thermal Imager

  • Fluke TiRx Thermal Imager
  • AC power supply/battery charger (including mains adapters)
  • SD memory card
  • SD card reader (USB) for downloading images into your computer
  • SmartView™ software with free software upgrades for life
  • Rugged hard carrying case
  • Soft transport bag
  • Hand strap
  • Users manual
  • Warranty registration card
  • Training DVD
Price List
UPG-TIRxUpgrade kit for TiRx Price List
Home   |   Site Map   |   Fluke Corporation   |   Safety Notices
Privacy Statement   |   Terms of Use  |   Terms and Conditions of Sale   |   Terms and Conditions of Service
© 1995 - 2018 Fluke Corporation