Keeping your world up and running.
Home  |  Products  |  Thermal Cameras and Gas Detectors  |  
This product is discontinued or reclassifiedFluke suggests:
Fluke TiS45 Infrared Camera

Fluke Ti9 Thermal Imager

Contact Me
Request A Demo
Fluke Ti9
Fluke Ti9
Fluke Ti9
Fluke Ti9
Fluke Ti9

The entry-level instrument for electricians and technicians

You won’t find a better or more rugged entry-level thermal imager. Just point and shoot to capture the full picture, showing the hotspots that warn of imminent equipment failure.

The 160 x 120 resolution shows all the essential details. That greatly increases the speed of inspecting, repairing and verifying electrical and (electro)mechanical equipment. It also helps extend equipment lifetime and avoid electrical fires.

Rugged and easy to use
Rated to IP54, the Ti9 resists dust and water and withstands a drop test of 2 meters. And you can upgrade it with IR-Fusion® to convert it to a full-featured Fluke Ti10 thermal imager with advanced analysis and reporting.

Fluke Ti9

  • Delivers the clear, crisp images needed to find problems fast.
  • Optimized for field use in harsh work environments.
  • Engineered and tested to withstand a 2 m (6.5 ft) drop—When was the last time you dropped a tool?
  • Withstands dust and water—tested to an IP54 rating.
  • Intuitive, three-button menu is easy to use—simply navigate with the push of a thumb.
  • Adjustable hand strap for left-or right-handed use.
Detailed Specifications

Temperature
Temperature measurement range (not calibrated below -10 °C) -20 °C to +250 °C (-4 °F to + 482 °F)
Accuracy ± 5 °C or 5 % (whichever is greater)

Imaging Performance
Field of view 23° x 17°
Spatial resolution (IFOV) 2.5 mRad
Minimum focus distance Thermal lens: 15 cm (6 in)
Focus Manual
Image frequency 9 Hz refresh rate
Detector type 160 X 120 focal plane array, uncooled microbolometer
Infrared lens type 20 mm F = 0.8 lens
Thermal sensitivity (NETD) ≤ 0.2 °C at 30 °C (200 mK)
Infrared spectral band 7.5 μm to 14 μm

Image Presentation
Palettes Ironbow, blue-red, high contrast, grey
Level and span Smooth auto-scaling and manual scaling of level and span
Minimum span (in manual mode) 5 °C (9 °F)
Minimum span (in auto mode) 10 °C (18 °F)

Image and Data Storage
Storage medium SD memory card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR or 3000 basic (.bmp) IR images)
File formats Non-radiometric (.bmp) or fully-radiometric (.is2)
No analysis software required for non-radiometric (.bmp) files
Export file formats w/SmartView® software JPEG, BMP, GIF, PNG, TIFF, WMF, EXIF, and EMF

General Specifications
Temperature -Operating: -10 °C to 50 °C (14 °F to 122 °F)
Temperature - Storage: -20 °C to +50 °C (-4 °F to 122 °F) without batteries
Display 9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD with backlight (selectable bright or auto)
Controls and adjustments
  • User selectable temperature scale (°C/°F)
  • Language selection
  • Time/Date set
Software SmartView® full analysis and reporting software included
Battery: Internal rechargeable battery pack (included)
Battery life: Three to four hours continuous use (assumes 50 % brightness of LCD)
Battery charge time using ac adapter/charger and dc car charger: Two hours for full charge
AC operation/charging AC adapter/charger (110 Vac to 220 Vac, 50 Hz to 60 Hz). Charges battery while imager is operating. Universal ac mains adapters included.
Power saving Sleep mode activated after 5 minutes of inactivity, automatic power off after 20 minutes of inactivity
Safety standards IEC 61010-1: Cat None, Pollution degree 2
Electromagnetic compatibility
  • EMC directive: EN61326-1
  • C-Tick: IEC/EN 61326
  • US FCC: CFR 47, Part 15 Class A
Vibration 2 G, IEC 68-2-29
Shock 25 G, IEC 68-2-29 {2 m (6.5 ft) drop, 5 sides}
Dimensions (HxWxL) 0.27 m x 0.13 m x 0.15 m (10.5 in x 5 in x 6 in)
Weight 1.2 kg (2.65 lb)
IP rating IP54
Warranty Two-years
Calibration cycle Two-years (assumes normal operation and normal aging)
Supported languages English, Italian, German, Spanish, French, Russian, Portuguese, Swedish, Turkish, Czech, Polish, Finnish, Simplified Chinese, Traditional Chinese, Korean, and Japanese
Model NameDescriptionPrice List
Fluke Ti9Thermal Imager
Thermal imaging camera w/ 20 mm lens.

Includes:
  • AC power supply/battery charger (including mains adapters)
  • SD memory card
  • SD card reader (USB) for downloading images into your computer
  • SmartView® software with free software upgrades for life
  • Rugged hard carrying case
  • Soft transport bag
  • Hand strap
  • Users manual
  • Warranty registration card
Price List

Batteries, Chargers and AdaptersPrice List
TI-CAR CHARGERInfrared Camera Vehicle Charger
For the ultimate flexibility in the field - recharge your infrared camera wherever and whenever you need to.
For use with all models except FlexCam.
Price List
Home   |   Site Map   |   Fluke Corporation   |   Safety Notices
Privacy Statement   |   Terms of Use  |   Terms and Conditions of Sale   |   Terms and Conditions of Service
© 1995 - 2018 Fluke Corporation