Keeping your world up and running.
Home  |  Products  |  Infrared Cameras and Gas Detectors  |  
This product is discontinued or reclassifiedFluke suggests:
Fluke TiX560 Infrared Camera

Fluke Ti50FT and Ti55FT IR FlexCam® Thermal Imagers with IR-Fusion® Technology

See how to increase the safety and speed of electrical thermography with IR Windows.
View a short video »
Fluke Ti50 Series
Fluke Ti50 Series
Fluke Ti50 Series
Fluke Ti50 Series
Fluke Ti50 Series
The professional’s choice when demanding the highest sensitivity

Choose the Fluke Ti5x models when you need the best images. They feature 320 x 240 detectors with industry leading thermal sensitivity (≤ 0.05 °C;50 mK NETD) for high resolution, ultra high-quality images. In addition, with a 60 Hz detector acquisition rate temperatures are displayed live on the large 5-inch color display.

All FT models feature the innovative IR-Fusion® technology. IR-Fusion captures a visible light image in addition to the infrared image and takes the mystery out of IR image analysis. It helps to better identify and report suspect components and enable the repair to be done right the first time. To find out more select IR-Fusion on the side navigation of this page.

Typical applications

  • Predictive maintenance – Identify electrical and mechanical problems before they cause failure
  • Power/utilities – Real-time analysis of substations, transmission lines and equipment
  • Process monitoring – Real-time observation to ensure efficient and safe operation
  • Research and development – Quantify heat patterns to improve product designs
  • Electronic design – Close up circuit board analysis

Fluke IR-Fusion Technology
Infrared and Visible light images are fused together - enabling you to view images in a range of modes from full IR to full visible light, and see exactly what you are viewing.
To find out more select "IR Fusion" in the side navigation of this page.
See exactly what you are viewing
Fluke IR-Fusion® technology links a real world visual image with a thermal image. It merges the two images into one, with the possibility to blend between the two images or create picture-in-picture combinations. Alarm limits can be superimposed over the visible light image to exactly pinpoint the components exceeding a specified temperature limit. Both the visual images and thermal images are available for use in reports. This speeds up documentation by reducing the need to look for individual images taken with a separate digital camera. IR Fusion helps to better identify and report suspect components and enable the repair to be done right the first time.

Large, sharp thermal images
Thanks to the largest display (five-inch) available on this type of thermal imager in combination with low-noise VOx sensors, the Fluke IR FlexCam units produce exceptionally high-quality images making even the smallest temperature differences visible. This is comparable with images normally only obtained on far more expensive instruments.

A sharp image in every situation
The innovative 180 ° articulating lens makes it possible to view and capture images in areas with poor accessibility. The display remains clearly visible while viewing over high objects, under a machine or around immoveable obstructions. The SmartFocus wheel simplifies getting a stable and sharp image. No need to take your hand off the instrument to turn a focus ring.

Make anomalies visible
Thanks to built-in functions like AutoCapture, the IR FlexCam Thermal Imagers help to troubleshoot difficult problems. The instrument is easily set up to automatically capture only those images where a temperature limit is exceeded. This way, difficult to find intermittent problems can be captured and analyzed quicker by concentrating only on the images containing the anomalies.

Analysis and reporting comes standard/span>
The SmartView™ software (supplied with the unit) includes a complete range of infrared image viewing, analysis, annotation and reporting tools. It even allows for customized reports to accommodate specific company work processes or requirements like multiple image reporting and comparisons. To find out more select SmartView on the side navigation of this page.

Radiometric measurement – the ‘data behind the picture’
Fully radiometric thermal imagers capture and store calibrated temperature data for the matrix of thousands of points that make up a thermal image. This makes it possible to perform detailed analysis and change key parameters like emissivity or temperature range either in the field on the camera or in the office using the PC software.


Ti55FTTi50FT
High resolution, low noise VOx detector for high quality images320 x 240
Temperature range to cover broad industrial applications-20 to +600 ºC
(-4 to 1112 ºF)
-20 to +350 ºC(-4 to 662 ºF)
High thermal sensitivity for viewing even the smallest temperature differences≤0.05 ºC≤0.07 ºC
180º articulating flexible lens to view images in every situation
Choice of 3 interchangeable lenses to cover every application
Large 5" high contrast color LCD for a clear picture independent of lighting conditions
Fully radiometric for detailed temperature analysis and tracking
SmartFocus for best image quality and accurate temperature measurements
Windows® CE based menu structure for ease of use
Personalized instrument set-up for multiple use
CompactFlash memory cards to store over 1000 IR images plus fully radiometric temperature data
SmartView reporting and analysis software included
AutoCapture for making intermittent problems visible
On-board analysis functions
User defined text annotations for simplified reporting
Built-in visible light (digital) camera
IR/Visible Alarm function

Laser pointer for easy targeting
Flash and torch light for high quality images in dark environments

Keep your Thermal Imager at optimal performance!
Check to see if you have the latest software or firmware version.

Specifications

Temperature measurement
Calibrated temperature range Ti55: -20 ˚C to 600 ˚C (-4 to 212 ºF) in 3 ranges
Ti50: -20 ˚C to 350 ˚C (-4 to 662 ºF) in 2 ranges
Range 1 Ti55: -20 ˚C to 100 ˚C (-4 to 212 ºF)
Ti50: -20 ˚C to 100 ˚C (-4 to 212 ºF)
Range 2 Ti55: -20 ˚C to 350 ˚C (-4 to 662 ºF
Ti50: -20 ˚C to 350 ˚C (-4 to 662 ºF)
Range 3 Ti55: 250 ˚C to 600 ˚C (482 to 1112 ºF)
Accuracy ±2 °C or 2 % (whichever is greater)
Measurement modes Ti55: Centerpoint, center box (area min/max, average), moveable spots/boxes, user defined field/text annotations, isotherms, automatic hot and cold point detection, visible color alarm above and below
Ti50: Centerpoint, center box (area min/max, average)
Emissivity correction 0.1 to 1.0 (0.01 increments)

Imaging performance
Thermal Field of view (FOV) 20 mm lens 23° x 17° FOV 10.5 mm lens 42° x 32° 54 mm lens 9° x 6 °
Spatial resolution (IFOV)* 1.30 mrad
Thermal sensitivity (NETD) Ti55: ≤ 0.05 °C (50 mK)at 30 °C
Ti50: ≤ 0.07 °C (70 mK) at 30 °C
Detector data acquisition* 60 Hz
Focus SmartFocus; one finger continuous focus
IR digital zoom Ti55: 2x, 4x, 8x
Ti50:2x
Detector type 320 x 240 Focal Plane Array, Vanadium Oxide (VOx) Uncooled Microbolometer with 25 micron pitch
Spectral band 8 µm to 14 µm
Digital image enhancement Automatic full-time enhanced
Visual On camera operating modes Full Thermal, full visual light or merged thermal-visual images. Picture-in-Picture
Visible light camera 1280 x 1024 pixels, full color
Visible light digital zoom Ti55: 2x, 4x
Ti50: 2x

Image presentation
Digital display 5" large high-resolution digital display
LCD backlight Sunlight readable color LCD
Video output RS170 EIA/NTSC or CCIR/PAL composite video

Optional lenses (Only available at time of purchase)
54 mm Telephoto lens High precision Germanium lens
Field of view (FOV) 9 º horizontal x 6 º vertical
Spatial resolution (IFOV) 0.47 mrad
Min focus distance 0.6 m
10.5 mm wide angle lens High precision Germanium lens
Field of view (FOV) 42 º horizontal x 32 º vertical
Spatial resolution (IFOV) 2.45 mrad
Min focus distance 0.3 m

Image capture and data storage
Storage medium Compact flash card stores over 1000 IR images (1 GB card standard)
File formats supported 14 bit measurement data included. Exportable JPEG, BMP, PCX, PNG, PSD.

Interfaces and software
Interface Compact flash card reader included
Software SmartView; Full analysis and reporting software included

Laser
Classification Class II
Laser targeting Laser dot visible on screen when blending thermal and visible image

Controls and adjustments
Set-up controls Date/time, temperature units C/F/K, language, scale, LCD intensity (high/normal/low)
Image controls Level, span, auto adjust (continuous/manual)
On-screen indicators Battery status, target emissivity, background temperature and real time clock
Set-up controls Date/time, temperature units C/F/K, language, scale, LCD intensity (high/normal/low)

Power, battery life
Battery type Li-Ion smart battery, rechargeable, field-replaceable
Battery operating time 3 hours continuous operation (2 hours with IR-Fusion engaged)
Battery charging 2 bay intelligent charger powered via AC outlet
AC operation AC adapter 110/220 VAC, 50/60 Hz (Ti55 only)
Power saving Automatic shutdown and sleep modes (user specified)

Environmental and mechanical design
Operating temperature -10 °C to +50 °C (14 °F to 122 °F)
Storage temperature -40 °C to +70 °C (-40 °F to 158 °F)
Relative humidity Operating and storage 10 % to 95 %, non-condensing
Water and dust resistant IP54
Weight (including batteries) 1.95 kg (4.3 lbs)
Camera size (HxWxD) 162 x 262 x 101 mm (6.5" x 10.5" x 4.0")

Other
Warranty 2 years

Model NameDescription
Fluke Ti50FT-20 IR FlexCam Thermal Imager with IR-Fusion

All models include:

  • Heavy duty carrying case
  • 2 rechargeable battery packs
  • Battery charger
  • AC adapter (for Ti55 model only)
  • Video cable
  • 512 MB compact flash card
  • Compact flash card reader and USB cable
  • Neck strap
  • SmartView reporting and analysis software on CD
  • User manual on CD
  • Calibration certificate
Fluke Ti55FT-20IR FlexCam Thermal Imager with IR-Fusion

7.5 Hz models are available in some geographies. Check with your Fluke sales representative for additional information.

Available Options
Use the Product Selector Tool in the "More Info" tab to view the entire range of possibilities.
Lens 10.5mm, 20mm, and 54mm lenses are available within the Ti5X series. Use the Product Selector tool to view the possible combinations.

        
Related Products
 
 Fluke CLKT C-Range Infrared Windows »
 
 Fluke 810 Vibration Tester »
Home  |   Site Map  |   Fluke Corporation  |   Safety Notices
Privacy Statement  |   Terms of Use   |   Terms and Conditions of Sale
© 1995 - 2017 Fluke Corporation