Introducing the next generation of Fluke Laser Distance Meters. Measure farther, with greater accuracy, in more situations.
Non-contact clinical IR thermometer for scanning elevated body temperature.
The Fluke 1555 insulation resistance tester offers digital insulation testing up to 10 kV, making them ideal for testing a wide range of high voltage equipment including switchgear, motors, generators and cables.
The Fluke 1550C offers digital insulation testing up to 5 kV, making it ideal for testing high voltage equipment including switch gear, motors, and cables.
Introducing the next generation of Fluke Laser Distance Meters. Measure farther, with greater accuracy, in more situations.
The Fluke 53 II single input digital thermometer with data logging offers fast response and laboratory accuracy (0.05% + 0.3 °C) in a rugged, handheld test tool.
The Fluke 287 electronics multimeter allows you to log and zoom in on problems. Now compatible with the Fluke Connect mobile app.
The 9144 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.
Fluke 721 Precision Pressure Calibrator with dual isolated sensors for gas custody transfer applications
E-DWT-H breaks new ground, improving the hydraulic pressure calibration process. E-DWT-H is an electronic calibrator designed to replace mechanical, piston-cylinder and weight based deadweight testers.
Inputs The Chub-E4 has four inputs for reading four different sensors simultaneously, and we’ll configure those inputs in any of three different ways according to your preference. Choose four channels of thermocouple inputs, four channels of PRT/thermistor inputs, or two channels of each. With this thermometer, reading thermocouples, PRTs, and thermistors accurately from the same device is no problem. 100-ohm, 25-ohm, or 10-ohm PRTs and RTDs are read using ITS-90, IEC-751 (DIN), or Callendar-Van...
1586A Super-DAQ Precision Temperature Scanner The 1586A Super-DAQ collects time-stamped precision temperature and electrical measurements for data analysis by technicians, engineers, and quality control personnel to verify process control, analyze interactive systems, ensure conformance to quality standards, or to correlate related events for R&D or troubleshooting. Measurement data and statistics can be viewed in tabular format for all active channels. With the graphing feature, up to four channels...
Simulates and measures all ANSI thermocouples, as well as L and U types, and provides cold junction compensation to enable calibration of a wide variety of thermocouple instrumentation. Direct input for storage of ITS-90 RTD constants. RTD source uncertainties to 0.03° C Extend pressure measurement range with any Fluke 750P and 700P Series Pressure Modules Converts easily to any pressure unit directly from the front panel or through remote communications. Sources dc voltage and current for multifunction...
Each temperature thermistor probe uses an ultra-stable glass thermistor enclosed in a thin-wall stainless steel tube. The basic semiconductor element is a bead of manganese, nickel, and cobalt oxides mounted on 0.1 mm platinum wires. For long-term stability, the thermistor is aged at various temperatures for 16 weeks. During the aging process, verification of the probe’s stability is done to ensure performance to published specs. The 5640, 5641, and 5642 thermistor probes are designed for the temperature...
The 6135A/PMUCAL system is made up of these hardware components, shipped in a 19-inch system rack with an integrated test connection panel: Three-phase 6135A Electrical Power Standard: Includes one 6105A Electrical Power Standard Master Unit and two 6106A Electrical Power Standard Auxiliary Units. Provides voltage and current stimuli to the PMU under test 6105A System Timing Unit: controls timing and synchronizes the tests done throughout the calibration system GPS receiver: supplies the 6135A/PMUCAL...
A “best fit” for your process calibration requirements “Doing more with less” is a requirement every process manufacturer faces today. To maintain product quality, reduce waste, improve efficiency and conform to regulatory standards, instruments that measure process variables such as temperature and pressure must be calibrated at regular intervals. Selecting the right calibrator for the job, however, can be tricky—especially when attempting to balance precision and versatility with cost....
Lightweight, portable, and fast Cool to –25 °C in 15 minutes and heat to 660°C in 15 minutes Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current True reference thermometry with accuracy to ±0.01 °C On-board automation and documentation Metrology performance in accuracy, stability, uniformity, and loading Built-in features to address large workloads and common applications Whether you need to calibrate 4-20 mA transmitters or a simple thermostatic switch, a Field Metrology...
MET/TEAM software works the way you do MET/TEAM calibration management software follows the flow of instrumentation into the company and through the calibration lab and quality management department. Data setup and management Setting up data is highly customizable, thanks to the flexible MET/TEAM interface. You can set up contacts as individuals, and associate them with facilities; create individual assets subject to events or generic equipment categories; track information based on asset type, and...
The Fluke 1550C insulation resistance test kit lets you evaluate the trends and eliminate the doubt.
The Fluke 1555 insulation resistance test kit lets you evaluate the trends and eliminate the doubt.
Fluke 3561 FC Vibration Sensors provide a simple, scalable way to start or expand your condition monitoring program
Get the right case for your Fluke tools. The CAMO-37 camouflage carrying case is a zippered carrying case with durable high quality polyester exterior. It has a belt loop and an inner pocket to store test leads or small accessories. It is available in a trendy camouflage design with a 1 year warranty.
Durable EVA foam case and divider to safely carry most multimeters
Fluke is voluntarily recalling certain BC1735/EELV Power Adapters which are used with the Fluke 1735 Power Logger.
table, th, td { border: 1px solid black; border-collapse: collapse; } table { width: 100%; } th { height: 50px; background-color: #ffc20e; text-align: center !important; } td { height: 50px; text-align: center; } SAFETY WARNING! PLEASE READ! Important Recall Information regarding FLUKE-17XX, Flat Cable, Voltage Test Lead 3-phase+N Dear Fluke Customer, Fluke Corporation has identified a safety issue affecting FLUKE-17XX, Flat Cable, Voltage Test Lead 3-phase+N cables produced from April 2021 up...
Promotion Description Eligible customers who participate in this Inspect Your Gadgets promotion (the “Promotion”) during the Promotion Period (as defined in Section 3) and meet all the requirements as set forth in these terms and conditions of the Promotion are eligible to receive a gift, further described below. Under the Promotion, eligible customers of Fluke Electronics Corporation or Fluke Electronics Limited Partnership (“Sponsor”) who purchase a “Qualifying Fluke Product”...
HVACR mechanics rarely rely on a single test to pass or fail a function or process. As they walk up to a condensing unit, they listen, they wave their hand over the condenser discharge air, and then they grab the suction line, the liquid line, and the discharge line (and wish they hadn't done that). All of this before they even open their tool box.
.super-custom html { font-family: sans-serif; -ms-text-size-adjust: 100%; -webkit-text-size-adjust: 100% } .super-custom body { margin: 0 } .super-custom article, .super-custom aside, .super-custom details, .super-custom figcaption, .super-custom figure, .super-custom footer, .super-custom header, .super-custom hgroup, .super-custom main, .super-custom menu, .super-custom nav, .super-custom section, .super-custom summary { display: block } .super-custom audio, .super-custom canvas, .super-custom...
In Part I of this short application note series, we discussed inspection points on motors to make during an energy audit or other efficiency program. Part I covers basic motor efficiency strategy and describes tests and cost savings for voltage and current unbalance and for power factor. Part II covers inspection points that are best incorporated into regular, long-term preventive maintenance.
After years of being a serviceman - slinging ladders, dragging tools across attics and through crawlspaces, standing in all sorts of weather on rooftops - I can now leave the service work to one of the younger techs with better knees and concentrate on my primary job as company start-up man.
One essential tool for installing, monitoring, and testing photovoltaic systems is the Fluke 393 FC solar clamp meter – rated CAT III 1500 V/CAT IV 600 V for CAT III environments including solar installations.
This case history involves the investigation of a utility transformer failure that occurred in a rural area surrounded mostly by farmland and open space. The failure occurred in a location where power quality problems are rare.
This final installment of the five-part series about using portable oscilloscopes covers how to "capture" waveforms that do not occur in a repeating and predictable way. You can view Part 4 of this series, Capturing and Analyzing Waveforms with a Portable Oscilloscope. You can also view the complete webinar with audio and animations at the Fluke Training Center.
Measuring linear distances
As I promised in my last column, this "Solid Ground" column deals with transformers and grounding. Let's start by addressing some definitions. Opinions differ on the "official" definition of "distribution" transformer.
B3 Electric Case Study Blog Post
Screening is an economical way to monitor assets by automating data collection. Learn more about the benefits of implementing vibration monitoring in your plant.
The capacitive voltage sensor works because when you hold the barrel in your hand and place the tip near a live conductor, you are inserting the high impedance sensing element into a capacitively coupled series circuit. As your hand and body form a relatively large capacitor coupled to the floor. The sensor tip is a small capacitor coupled to the live voltage. The sensing circuit detects the voltage and turns on a light or sounds the buzzer.
By Brian Harrison According to a Fluke 2019 survey, roughly 50 percent of maintenance and reliability professionals were actively planning Industrial Internet of Things (IIoT) initiatives. This survey preceded the challenges brought about by COVID-19. At the time, more than half of the teams interviewed found the IIoT process to be more complicated than anticipated because of an essential prerequisite—collaboration with other teams and departments. Despite the business disruption caused by the...
Dear Customer: Fluke Corporation is executing a voluntary field action of its Fluke 67 Max Clinical Infrared Thermometer. All devices are impacted unless a green mark has been placed on the label located in the battery compartment as show in Figure 1 below. Figure 1: View of Label with Green Mark Located within the Battery Compartment If you own a Fluke 67 Max Clinical Infrared Thermometer that does not contain a green mark as shown in Figure 1 and are experiencing any perceived accuracy (temperature...
Identifying the severity of a problem by looking at data can be difficult. Color-coded, varying severity alarms enable maintenance managers to make better data-driven decisions.
The formula can be stated in two ways, depending on what you're looking for. It is usually applied to the leading edge of a pulse in a dynamic system and is related to resistor-capacitor filter time constants and settling times.
If you knew how much it cost to run that equipment
Firmware release V1.14 For Fluke 123B, 124B and 125B ScopeMeter Test Tools V1.14 software update had the following improvements: Fixed issue that caused unit to show spikes on waveform in fastest timebase modes Improved Bushealth function for ModBus signals Fixed bug that caused unit to reboot in Recorder mode when changing F2=View setting Fixed issue that caused unit to reboot in BusHealth mode for AS-I bus Fixed issue that some events are not shown when selecting Normal View mode Fixed issue for...
Dear Fluke Customer: Fluke is voluntarily recalling its 190 Series ScopeMeter®100MHz and 200MHz 4 Channel Hand Held Oscilloscopes that contain firmware version V10.40. This includes all units manufactured between February 5, 2012 and April 3rd 2012 and have a serial number range of 1954xxxx to 2009xxxx, and all units upgraded to firmware version V10.40 after February 5, 2012. Four channel models with the latest firmware (V10.40) may display the decimal point of the measurement value in the wrong...
Firmware Release V11.46 » Firmware Release V11.46 Readme » For Fluke 190 Series II, 2 and 4 Channel instruments with firmware version V09.00 onwards. The firmware release V11.46 has the following improvements: Firmware version V11.45 For Fluke 190 Series II, 2 and 4 Channel instruments with firmware version V09.00 onwards. The firmware release V11.45 has the following improvements: Resolved issue with data storage of set-up files on USB-flash drives Firmware version V11.44 The firmware release...